Free preview · full pattern in the Heirloom Doilies & Tablecloths

Figure 16 Shell-and-Loop Doily Border (1915): vintage crochet pattern

A border worked back and forth across the lace on a chain of 47, so it can be made any length: shells of four double crochet and chain-3 loops travel across each row, and a fan of ten treble crochet opens out at the outer edge every sixth row.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Printed page 13 — the directions for Fig. 16, Doily, with Fig. 18 photographed below.
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
Yardagethe book gives no thread quantity for this design. (as printed; yardage not given)
Hook1.4 mm
GaugeNo gauge printed. Work the first few rounds and match the hook to the thread so the work lies flat.
Finished sizeNot printed.
Timeabout 4 hours

Materials

  • Size 50 crochet thread — approximate modern equivalent of the book's No. 50 crochet cotton
  • 1.4 mm steel hook (US steel 9) — approximate for the book's No. 9 hook
  • Fine tapestry or sewing needle for the ends
  • Hook: Start with 1.4 mm (US steel 9) — approximate for the book's No. 9 hook; change size until the thread runs easily and the work lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
single crochet
double crochet
treble crochet
stitch
stitches
skip
repeat
row
shell
loop

Notes before you start

  • Source: "Figure 16. Doily", The Priscilla Crochet Book: Centerpieces and Doilies (edited by Belle Robinson), The Priscilla Publishing Company, Boston, 1915. Public domain in the USA.
  • As printed — materials: Number 50 crochet cotton; Steel crochet needle No. 9. Gauge: Not given.
  • Modernisation note: Stitches converted by the book's own “Explanation of Stitches” (printed page 3), not by name. This book uses the older British-style naming, so its stitch names do NOT match modern US names: chain (ch) = ch; slip stitch (sl) = sl st; “double” (d), hook through work, draw thread through, “thread over again and through both loops” = modern US single crochet (sc) — the book adds that this stitch “has been, especially in wool crochet, called ‘single crochet’”; “half treble” (h t), thread over, through work, then “thread over and through all three sts at once” = modern US half double crochet (hdc); “treble” (t), thread over, through work, “thread over and through two loops, thread over and again through two loops” = modern US double crochet (dc); “double treble” (d t), thread over twice and worked off by twos three times = modern US treble crochet (tr); “long treble” (l t) or “triple treble” (t t), thread over three times, worked off by twos = modern US double treble (dtr); “quadruple treble” (q t), thread over four times = modern US triple treble. Every stitch below has been rewritten in the modern US name and abbreviation on that basis.
  • Modernisation note: The book's abbreviations are written in modern US form: d = sc, h t = hdc, t = dc, d t = tr, l t = dtr, st(s) = st(s), sp = sp, “miss” = sk, “thread over (the needle)” = yo, “repeat” = rep, “needle” (for the crochet hook) = hook. Ordinal row and round names (“1st round”, “2d round”) are written Rnd 1, Rnd 2 and Row 1, Row 2. Section headings (Border, Edge, Heading) are the book's own where it prints them. The book's British spelling “centrepiece” is kept inside quoted names.
  • Modernisation note: The book prints each design as one or two solid paragraphs; these have been split into one round, row or step per line. Stitch order and counts are unchanged. Where the book's own repeat markers (*, **) span several lines they are kept as printed.
  • Modernisation note: Thread sizes are the 1915 numbering. “No. N crochet cotton” is given as modern size N crochet thread, which is an approximation: modern size numbering runs the same way (higher number = finer thread) but the exact diameters are not identical. The book states that where it says “crochet cotton” it means the hard-twisted cotton sold as Cordonnet, Cordonnet Special, Cordichet, Kord-net and similar. No yardage is printed for any design, so none is given here.
  • Modernisation note: Hook sizes are the book's own steel numbering, and the book itself says only a suggestion can be given: “since crochet-hooks vary, even in the most carefully graded kinds, it follows that only suggestion and not absolute directions can be given for the selections of crochet hooks.” The 1915 steel numbering is not identical to the modern one, so every metric size below is approximate and should be adjusted to the thread.
  • Modernisation note: The book's general “Directions for Working” asks the worker to allow for tension, especially in chain stitches: loose workers may need one chain fewer in places and tight workers one or more chains more, “more necessary in circular work than that of straight rows.” That allowance applies to every design here.
  • Modernisation note: No gauge is printed for this design; work the centre rounds and adjust the hook until the piece lies flat.
  • Modernisation note: Metric conversions added.
  • Modernisation note: The book points to Fig. 15 as a photographed detail of this border; that photograph is on the same printed page and is only a picture of the stitch pattern, not extra directions.
Smart Pattern Companion

Row progress: 0 of 12 done (0%)

Border

0 of 12 done
  1. In this doily a shell is (4 dc, ch 2, 4 dc) and a loop is (1 sc, ch 3, 1 sc).
    Mark row complete
  2. Ch 47, turn.
    Mark row complete
  3. Row 1: Shell in the 4th ch st, sk 4, sc in next st, ch 3, sc in the same st, ch 5, sk 4, sc in next st, ch 3, sc in the same st, sk 4, shell in next st, sk 4, sc in next st, ch 3, sc in the same st, * ch 5, sk 4, sc in next st, ch 3, sc in the same st; rep from * 3 times more, ch 3, sc in the last ch st, ch 3, turn.
    Mark row complete
  4. Row 2: Sc over the 3 ch, * ch 5, sc over the next 5 ch, ch 3, sc over the same ch; rep from * 3 times more, shell over the next loop, sc over the 2 ch of the shell in the first row, ch 3, sc over the same, ch 5, sc over the next 5 ch, ch 3, sc over the same, shell over the next loop, sc over the 2 ch of the shell, ch 4, turn.
    Mark row complete
  5. Row 3: Make a loop (sc, ch 3, sc) over the first shell, shell over the next loop, loop over the next 5 ch, ch 5, loop over the next shell, shell over the next loop, loop over the next 5 ch, * ch 5, loop over the next 5 ch; rep from * twice more, ch 3, sc over the 3 ch at the end, ch 3, turn.
    Mark row complete
  6. Row 4: Sc over the 3 ch, * ch 5, loop over the next 5 ch; rep from * twice more, shell over the next loop, loop over the next shell, ch 5, loop over the next 5 ch, shell over the next loop, loop over the next shell, ch 6, sc over the loop in the shell of the 2nd row, ch 4, sc over the 2 ch of the shell of the 1st row, turn.
    Mark row complete
  7. Row 5: 10 tr (thread over twice) over the 6 ch, ch 2, shell over the next loop, loop over the next shell, ch 5, loop over the next 5 ch, shell over the next loop, loop over the next shell, * ch 5, loop over the next 5 ch; rep from * twice more, ch 3, sc over the 3 ch at the end, ch 3, turn.
    Mark row complete
  8. Row 6: Sc over the 3 ch, * ch 5, loop over the next 5 ch; rep from * twice more, ch 5, loop over the next shell, shell over the next loop, loop over the next 5 ch, ch 5, loop over the next shell, shell over the next 2 ch (just before the tr), ch 2, tr between the first and second sts, * ch 1, tr between the next 2; rep 8 times more (10 tr in all), ch 1, sc at the top of the shell of the 1st row, ch 4, turn.
    Mark row complete
  9. Row 7: * Sc between the next 2 tr, ch 4; rep from * (making 9 meshes), ch 3, shell over the 2 ch just before the tr, loop over the next shell, ch 5, loop over the next 5 ch, shell over the next loop, loop over the next shell, * ch 5, loop over the next 5 ch; rep from * 3 times more, ch 3, sc over the 3 ch at the end, ch 3, turn.
    Mark row complete
  10. Row 8: Like Row 2.
    Mark row complete
  11. Row 9: Like Row 3, and so on.
    Mark row complete
  12. When making the last row of the desired length, join the loops by sl st at the proper places to the 1st row.
    Mark row complete

Working on:

In this doily a shell is (4 dc, ch 2, 4 dc) and a loop is (1 sc, ch 3, 1 sc).

Continue this pattern

The rest of the Figure 16 Shell-and-Loop Doily Border (1915) pattern is in the Heirloom Doilies & Tablecloths

Still to come in the full pattern:

  • Finishing

Included with 236 patterns for $19 — $0.08 per pattern.

See what's inside
Cover artwork for the vintage doilies and tablecloths collection: lace doilies in fine cotton thread with a steel hook

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Figure 16. Doily pattern from?

It was published as "Figure 16. Doily" in The Priscilla Crochet Book: Centerpieces and Doilies (edited by Belle Robinson) by The Priscilla Publishing Company, Boston in 1915. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Figure 16. Doily?

Size 50 crochet thread. Not printed — the book gives no thread quantity for this design.

What hook should I use?

Start with 1.4 mm (US steel 9) — approximate for the book's No. 9 hook; change size until the thread runs easily and the work lies flat. Gauge: No gauge printed. Work the first few rounds and match the hook to the thread so the work lies flat.

You might also like