Free preview · full pattern in the Heirloom Doilies & Tablecloths

Figure 47 Braid-Founded Border for a Doily (1915): vintage crochet pattern

A border begun on a ring of novelty braid (or a 30-inch chain): fans of six double crochet and long chains build four alike rounds, then a mesh round, shells and a treble-and-picot edge finish a ten-inch linen centre. Originally published as "Figure 47. Border for Doily" in The Priscilla Crochet Book: Centerpieces and Doilies (edited by Belle.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Printed page 24 — the directions for Fig. 47, Border for Doily; the border is photographed on printed page 23.
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
Yardagethe book gives no thread quantity for this design. (as printed; yardage not given)
Hook1.5 mm
GaugeNo gauge printed. Work the first few rounds and match the hook to the thread so the work lies flat.
Finished sizeMade on 30 in (76 cm) of braid around a 10 in (25 cm) linen centre.
Timeabout 3 hours

Materials

  • Size 20 crochet thread — approximate modern equivalent of the book's No. 20 crochet cotton
  • A medium steel hook, about 1.5 mm (US steel 8) — the book gives no number for this design
  • 10 in (25 cm) linen circle for the centre
  • 30 in (76 cm) of looped novelty braid, or a 30 in chain in its place
  • Hook: Start with 1.5 mm (US steel 8) — the book asks only for “a medium-sized steel needle”; change size until the thread runs easily and the border lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
single crochet
double crochet
treble crochet
stitch
stitches
skip
repeat
round
shell
space

Notes before you start

  • Source: "Figure 47. Border for Doily", The Priscilla Crochet Book: Centerpieces and Doilies (edited by Belle Robinson), The Priscilla Publishing Company, Boston, 1915. Public domain in the USA.
  • As printed — materials: Crochet cotton No. 20; A medium-sized steel needle; 10-inch linen centre; 30 inches of novelty braid. Gauge: Not given.
  • Modernisation note: Stitches converted by the book's own “Explanation of Stitches” (printed page 3), not by name. This book uses the older British-style naming, so its stitch names do NOT match modern US names: chain (ch) = ch; slip stitch (sl) = sl st; “double” (d), hook through work, draw thread through, “thread over again and through both loops” = modern US single crochet (sc) — the book adds that this stitch “has been, especially in wool crochet, called ‘single crochet’”; “half treble” (h t), thread over, through work, then “thread over and through all three sts at once” = modern US half double crochet (hdc); “treble” (t), thread over, through work, “thread over and through two loops, thread over and again through two loops” = modern US double crochet (dc); “double treble” (d t), thread over twice and worked off by twos three times = modern US treble crochet (tr); “long treble” (l t) or “triple treble” (t t), thread over three times, worked off by twos = modern US double treble (dtr); “quadruple treble” (q t), thread over four times = modern US triple treble. Every stitch below has been rewritten in the modern US name and abbreviation on that basis.
  • Modernisation note: The book's picot (p) is defined on the same page: it is formed on a chain by joining the last four stitches (or any given number) in a ring by working a slip stitch or a single crochet in the fourth stitch from the hook, and “a sl is understood unless otherwise designated.” Picots are written out as “picot” with the chain count the design gives, since the site's abbreviation list has no picot entry.
  • Modernisation note: The book's abbreviations are written in modern US form: d = sc, h t = hdc, t = dc, d t = tr, l t = dtr, st(s) = st(s), sp = sp, “miss” = sk, “thread over (the needle)” = yo, “repeat” = rep, “needle” (for the crochet hook) = hook. Ordinal row and round names (“1st round”, “2d round”) are written Rnd 1, Rnd 2 and Row 1, Row 2. Section headings (Border, Edge, Heading) are the book's own where it prints them. The book's British spelling “centrepiece” is kept inside quoted names.
  • Modernisation note: The book prints each design as one or two solid paragraphs; these have been split into one round, row or step per line. Stitch order and counts are unchanged. Where the book's own repeat markers (*, **) span several lines they are kept as printed.
  • Modernisation note: Thread sizes are the 1915 numbering. “No. N crochet cotton” is given as modern size N crochet thread, which is an approximation: modern size numbering runs the same way (higher number = finer thread) but the exact diameters are not identical. The book states that where it says “crochet cotton” it means the hard-twisted cotton sold as Cordonnet, Cordonnet Special, Cordichet, Kord-net and similar. No yardage is printed for any design, so none is given here.
  • Modernisation note: Metric conversions added.
  • Modernisation note: Check: the book gives no hook number for this design, only “a medium-sized steel needle”, so the metric size above is our own suggestion tied to the thread.
Smart Pattern Companion

Row progress: 0 of 8 done (0%)

Border

0 of 8 done
  1. Join the ends of the braid by sewing neatly, or use a 30-inch chain.
    Mark row complete
  2. Rnd 1: Make 1 dc in each loop of the braid, with ch 2 between the dc; join with sl st.
    Mark row complete
  3. Rnd 2: Sl st on the first ch, ch 3, 5 dc over the first ch, ch 5, 1 dc over the same ch, ch 5, * sk 2 open meshes, 6 dc over the next ch, ch 5, 1 dc over the same ch, ch 5; rep from *, join with sl st in the first of the 6 dc.
    Mark row complete
  4. Rnd 3: Sl st over the 6 dc, ch 3 (as 1 dc), 5 dc over the 5 ch, ch 5, 1 dc over the same ch, ch 5, * sk 5 ch and 6 dc, 6 dc over the next 5 ch, ch 5, 1 dc over the same ch, ch 5; rep from *, join with sl st in the first of the 6 dc.
    Mark row complete
  5. Rnds 4, 5 and 6: Like Rnd 3.
    Mark row complete
  6. Rnd 7: Ch 4, 1 dc over the 3rd and 6th dc of the group, over the middle of the 5 ch, over the next dc, and over the middle of the next 5 ch, with ch 1 between the dc throughout the round. Make the number of meshes in this round divisible by 6, by adding an occasional mesh if necessary.
    Mark row complete
  7. Rnd 8: Sl st to the middle of the first mesh, * ch 5, sk 2 meshes, a shell (3 dc, ch 2, 3 dc) over the next mesh, ch 5, sk 2 meshes, 1 sc over the next mesh; rep from *.
    Mark row complete
  8. Rnd 9: Ch 5, over the 2 ch make (1 dc, 1 tr, picot of 5 joined with sc, 2 tr, picot, 2 tr, picot, 1 tr, 1 dc), ch 5, 1 sc over the sc.
    Mark row complete

Working on:

Join the ends of the braid by sewing neatly, or use a 30-inch chain.

Continue this pattern

The rest of the Figure 47 Braid-Founded Border for a Doily (1915) pattern is in the Heirloom Doilies & Tablecloths

Still to come in the full pattern:

  • Finishing

Included with 236 patterns for $19 — $0.08 per pattern.

See what's inside
Cover artwork for the vintage doilies and tablecloths collection: lace doilies in fine cotton thread with a steel hook

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Figure 47. Border for Doily pattern from?

It was published as "Figure 47. Border for Doily" in The Priscilla Crochet Book: Centerpieces and Doilies (edited by Belle Robinson) by The Priscilla Publishing Company, Boston in 1915. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Figure 47. Border for Doily?

Size 20 crochet thread. Not printed — the book gives no thread quantity for this design.

What hook should I use?

Start with 1.5 mm (US steel 8) — the book asks only for “a medium-sized steel needle”; change size until the thread runs easily and the border lies flat. Gauge: No gauge printed. Work the first few rounds and match the hook to the thread so the work lies flat.

You might also like