Free preview · full pattern in the Vintage Crochet Edgings & Trims

Figure 73 Picot Loop Handkerchief Edging (1916): vintage crochet pattern

A single-row handkerchief edge worked over a narrow hem: two picots are set into the hem in each repeat and a chain-9 loop is thrown back over the thread and filled with three more picots. Originally published as "Figure 73. Edging for Handkerchief" in The Priscilla Crochet Book: Edgings and Insertions, No. 2 (Edited by Belle Robinson) by.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Printed page 41 — Fig. 73, Edging for Handkerchief, photographed on the corner of a linen square, with its directions.
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
Yardagethe book gives no thread quantity for any design. (as printed; yardage not given)
Hook0.75 mm
GaugeNo gauge printed. Work a sample repeat and match the hook to the thread.
Finished sizeNot printed — the piece is worked to the length required.
Timeabout 2 hours

Materials

  • Size 150 crochet thread — approximate modern equivalent of the book's No. 150 crochet cotton
  • 0.75 mm steel hook (US steel 14) — approximate for the book's No. 14 hook
  • Fine tapestry or sewing needle for the ends
  • A handkerchief with a very narrow hem
  • Hook: Start with 0.75 mm (US steel 14) — approximate for the book's No. 14 hook; change size until the thread runs easily without splitting and the lace lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
single crochet
slip stitch
stitch
stitches
repeat
loop

Notes before you start

  • Source: "Figure 73. Edging for Handkerchief", The Priscilla Crochet Book: Edgings and Insertions, No. 2 (Edited by Belle Robinson), The Priscilla Publishing Company, Boston, 1916. Public domain in the USA.
  • As printed — materials: Crochet cotton No. 150 — the book's Materials paragraph says “crochet cotton” means the hard-twisted cotton sold as Cordonnet, Cordonnet Special, Cordichet, Kord-net and similar; Hook No. 14; A handkerchief with a very narrow hem, with 3 threads drawn as for hemstitching. Gauge: Not given.
  • Modernisation note: Stitches converted by the book's own “Explanation of Stitches” (printed page 3), not by name. This book uses the older British-style naming, so its stitch names do NOT match modern US names: chain (ch) = ch; slip stitch (sl) = sl st; “double” (d), “put hook through work, draw thread through work (making two loops on the hook); thread over again and through both loops” = modern US single crochet (sc) — the book itself notes this stitch “has been, especially in wool crochet, called ‘single crochet’”; “half treble” (ht), thread over, through work, “thread over and through all three sts at once” = modern US half double crochet (hdc); “treble” (t), thread over, through work, “thread over and through two loops, thread over and again through two loops” = modern US double crochet (dc); “double treble” (dt), thread over twice and worked off by twos three times = modern US treble crochet (tr); “long treble” (lt) or “triple treble” (tt), thread over three times and crocheted off by twos = modern US double treble (dtr); “quadruple treble” (qt), thread over four times = modern US triple treble (trtr). Every stitch in these instructions has been rewritten in the modern US name and abbreviation on that basis.
  • Modernisation note: The book's picot (p) is defined on the same page: “A p is formed on a ch by joining the last four sts (or any given number) in a ring by working a sl, or a d, in the fourth st from the hook. In the following directions a sl is understood unless otherwise designated.” Picots are written out as “picot” with the chain count the design gives, since the site's abbreviation list has no picot entry.
  • Modernisation note: The book's abbreviations are written in modern US form: d = sc, ht = hdc, t = dc, dt = tr, lt/tt = dtr, st(s) = st(s), sp = sp, p = picot, blk = block, “miss” = sk, “thread over (the hook)” = yo, “repeat” = rep, “needle” (where it is used for the crochet hook) = hook. Ordinal row names (“1st row”, “2d row”) are written Row 1, Row 2, and “1st round”/“2d round” as Rnd 1, Rnd 2. Section headings (Heading, Edge, Lower Edge, Filling) are the book's own where it prints them.
  • Modernisation note: The book prints each design as one or two solid paragraphs; these have been split into one row, round or step per line. Stitch order and counts are unchanged. Where the book's own repeat markers (*, **, ***) span several lines they are kept as printed.
  • Modernisation note: Thread sizes are the book's own numbering. Its Materials paragraph says that “where the words ‘crochet cotton’ are used in the text of this book, the cotton referred to is the hard-twisted cotton known by such names as Cordonnet, Cordonnet Special, Cordichet, Kord-net, etc.” “No. N crochet cotton” is given below as modern size N crochet thread, which is an approximation: modern size numbering runs the same way (higher number = finer thread) but the exact diameters are not identical. No yardage is printed anywhere in the book, so none is given here.
  • Modernisation note: Hook sizes are the book's own steel numbering. The 1916 steel numbering is not identical to the modern one, so every metric size below is approximate and should be adjusted to the thread.
  • Modernisation note: No gauge and no finished measurements are printed for this design; work a sample repeat and adjust the hook until the lace lies flat at the width you want.
  • Modernisation note: Metric conversions added.
Smart Pattern Companion

Row progress: 0 of 2 done (0%)

Edging

0 of 2 done
  1. Over a very narrow hem, with 3 threads drawn as for hemstitching, * make 3 sc, picot of 5 joined by a sc made through the top of the last sc and under the hem, 7 sc, picot of 5 joined as before, 3 sc, ch 9, turn the point of the hook back over the thread and sl st in the 4th st from the last picot, cover the ch with (2 sc, picot of 5 without joining, 4 sc, picot, 4 sc, picot, 2 sc); rep from *.
    Mark row complete
  2. Crowd the stitches at the corners closely to make the work lie flat.
    Mark row complete

Working on:

Over a very narrow hem, with 3 threads drawn as for hemstitching, * make 3 sc, picot of 5 joined by a sc made through the top of the last sc and under the hem, 7 sc, picot of 5 joined as before, 3 sc, ch 9, turn the point of the hook back over the thread and sl st in the 4th st from the last picot, cover the ch with (2 sc, picot of 5 without joining, 4 sc, picot, 4 sc, picot, 2 sc); rep from *.

Continue this pattern

The rest of the Figure 73 Picot Loop Handkerchief Edging (1916) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Figure 73. Edging for Handkerchief pattern from?

It was published as "Figure 73. Edging for Handkerchief" in The Priscilla Crochet Book: Edgings and Insertions, No. 2 (Edited by Belle Robinson) by The Priscilla Publishing Company, Boston in 1916. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Figure 73. Edging for Handkerchief?

Size 150 crochet thread. Not printed — the book gives no thread quantity for any design.

What hook should I use?

Start with 0.75 mm (US steel 14) — approximate for the book's No. 14 hook; change size until the thread runs easily without splitting and the lace lies flat. Gauge: No gauge printed. Work a sample repeat and match the hook to the thread.

You might also like