Free preview · full pattern in the Vintage Crochet Edgings & Trims

Figure 35 Bean Stitch Insertion (1913): vintage crochet pattern

A thirteen-space filet insertion with a diamond of bean stitches — four loops drawn up in one chain space and taken off together — worked over a six-row repeat. Originally published as "Figure 35. Insertion" in The Priscilla Crochet Book: Edgings and Insertions by The Priscilla Publishing Company, Boston in 1913, it is now in the public domain.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Book page 10 — the directions for Figure 35.
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
Yardagethe book gives no thread quantity for any design. (as printed; yardage not given)
Hook0.75 mm
GaugeNo gauge printed. Work a sample repeat and match the hook to the thread.
Finished sizeNot printed. The insertion is 13 spaces wide, worked from a chain of 45.
Timeabout 3 hours

Materials

  • Size 100 crochet thread — approximate modern equivalent of No. 100 Cordonnet crochet cotton
  • 0.75 mm steel hook (US 14) — approximate for the book's No. 13 hook
  • Fine tapestry or sewing needle for the ends
  • Hook: Start with 0.75 mm (US steel 14) — approximate for the book's No. 13 hook; change size until the thread runs easily without splitting and the lace lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
double crochet
stitch
stitches
skip
space
yarn over
repeat
row

Notes before you start

  • Source: "Figure 35. Insertion", The Priscilla Crochet Book: Edgings and Insertions, The Priscilla Publishing Company, Boston, 1913. Public domain in the USA.
  • As printed — materials: No. 100 Cordonnet crochet cotton — from the book's general Materials paragraph: all of the edgings shown were made of No. 100 Cordonnet crochet cotton except those in which the number of cotton is specified in the directions; No. 13 hook — the book directs a No. 13 hook for No. 100 cotton and a No. 12 hook for No. 70 cotton, and for coarser cottons a hook that will carry the thread easily without splitting it. Gauge: Not given.
  • Modernisation note: Stitches converted by the book's own “Explanation of Stitches” (printed page 3), not by name. This book uses the older British-style naming, so its stitch names do NOT match modern US names: chain (ch) = ch; slip stitch (sl st) = sl st; “double” (d), “put hook through work, thread over hook and draw through, making two loops on needle; thread over again and draw through both loops” = modern US single crochet (sc); “half treble” (h t), thread over, draw through, then “draw through the three sts at once” = modern US half double crochet (hdc); “treble” (t), thread over, draw through, “draw through two, over again and draw through remaining two” = modern US double crochet (dc); “double treble” (d t), thread over twice and work off by twos three times = modern US treble crochet (tr); “long treble” (l t), thread over three times and “work all off by twos” = modern US double treble (dtr). Every stitch in these instructions has been rewritten in the modern US name and abbreviation on that basis.
  • Modernisation note: The book's abbreviations are written in modern US form: d = sc, h t = hdc, t = dc, d t = tr, l t = dtr, st(s) = st(s), sp = sp, l = lp, bl = block, “miss” = sk, “thread over (the hook/needle)” = yo, “repeat” = rep, “needle” (for the crochet hook) = hook. Ordinal row names (“1st row”, “2d row”) are written Row 1, Row 2, and “1st round”/“2d round” as Rnd 1, Rnd 2. Section headings (Heading, Edge, Foundation) are the book's own where it prints them.
  • Modernisation note: Bean stitch is the book's own name and has no entry in the site's abbreviation list, so it is written out as “bean”; its definition is given in full in Row 2 exactly where the book defines it.
  • Modernisation note: The book prints each design as one or two solid paragraphs; these have been split into one row, round or step per line. Stitch order and counts are unchanged. Where the book's own repeat markers (*, **, ***) span several rows they are kept as printed.
  • Modernisation note: Thread sizes are the 1913 Cordonnet numbering. “No. N Cordonnet crochet cotton” is given as modern size N crochet thread, which is an approximation: modern size numbering runs the same way (higher number = finer thread) but the exact diameters are not identical. No yardage is printed anywhere in the book, so none is given here.
  • Modernisation note: Hook sizes are the book's own steel numbering (“For No. 100 cotton use a No. 13 hook, for No. 70 cotton a No. 12 hook; for coarser cottons use a hook that will carry the thread easily without splitting it”). The 1913 steel numbering is not identical to the modern one, so every metric size below is approximate and should be adjusted to the thread.
  • Modernisation note: No gauge and no finished measurements are printed for this design; work a sample repeat and adjust the hook until the lace lies flat at the width you want.
  • Modernisation note: Metric conversions added.
Smart Pattern Companion

Row progress: 0 of 9 done (0%)

Insertion

0 of 9 done
  1. Ch 45.
    Mark row complete
  2. Row 1: 1 dc in the 8th st from hook, (ch 2, sk 2, 1 dc in the next st) 11 times; turn.
    Mark row complete
  3. Row 2: Ch 5, 1 dc in the next dc, (ch 2, sk 2, 1 dc in the next dc) twice. Then make a bean st: yo, take a st under the next ch 2, yo, take a st in the same place 3 times more, drawing the sts all up the same length, yo and draw through all the sts on the hook, ch 1 to fasten. 1 dc in the next dc, (ch 2, 1 dc in the next dc) 5 times, 1 bean in the next sp, 1 dc in the next dc, (ch 2, 1 dc in the next dc) 3 times; turn.
    Mark row complete
  4. Row 3: Ch 5, make 2 sps, 1 bean in the next sp, 1 sp, 1 bean, 3 sps, 1 bean, 1 sp, 1 bean, 2 sps; turn.
    Mark row complete
  5. Row 4: 1 sp, 1 bean in each alternate sp until 6 beans are made, 1 sp at the end; turn.
    Mark row complete
  6. Row 5: 2 sps, 2 beans with 1 sp between, 3 sps, 2 beans with 1 sp between, 2 sps; turn.
    Mark row complete
  7. Row 6: 3 sps, 1 bean, 5 sps, 1 bean, 3 sps; turn.
    Mark row complete
  8. Row 7: 13 sps like Row 1.
    Mark row complete
  9. Rep from Row 2 for the length desired.
    Mark row complete

Working on:

Ch 45.

Continue this pattern

The rest of the Figure 35 Bean Stitch Insertion (1913) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Figure 35. Insertion pattern from?

It was published as "Figure 35. Insertion" in The Priscilla Crochet Book: Edgings and Insertions by The Priscilla Publishing Company, Boston in 1913. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Figure 35. Insertion?

Size 100 crochet thread. Not printed — the book gives no thread quantity for any design.

What hook should I use?

Start with 0.75 mm (US steel 14) — approximate for the book's No. 13 hook; change size until the thread runs easily without splitting and the lace lies flat. Gauge: No gauge printed. Work a sample repeat and match the hook to the thread.

You might also like