Free preview · full pattern in the Vintage Crochet Edgings & Trims

Pointed Filet Yoke with Daisies (1921): vintage crochet pattern

A shaped filet crochet yoke (listed in the contents as “Pointed Yoke in Daisies”) worked in one piece from the point on one sleeve, over the shoulders and around a deep V neck to the point on the other sleeve, with a flower design and a beading and picot edge at the neck.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Pointed Yoke (top) and Rose Yoke or Collar in Tabs (bottom) as photographed
Original colourwaySave to Pinterest
Pattern at a glance
DetailValue
Skill levelAdvanced
Yarn weightLace (#0)
YardageNot printed. (as printed; yardage not given)
Hook0.75 mm
GaugeNo gauge printed (the book's table: size 70 thread, 8 meshes to the inch).
Finished sizeNot printed; the shape is set by the chart.
Timeabout 3 hours

Materials

  • Size 70 mercerized cotton crochet thread — approximate equivalent of Coats Mercerized Crochet No. 70
  • Steel crochet hook (original: No. 14)
  • Ribbon for the neck beading (shown in the photograph)
  • Sewing needle and thread
  • Hook: Start with 0.75 mm (steel hook US steel No. 14) — approximate conversion of the printed No. 14 hook. No gauge is printed; the book's table gives about 8 meshes to the inch for size 70 thread.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
double crochet
treble crochet
space
repeat
row

Notes before you start

  • Source: "Pointed Yoke", J. & P. Coats Crochet Book No. 7: Sweaters, Yokes, and Boudoir Caps (designed by Anne Orr), J. & P. Coats, Pawtucket, R.I., 1921. Public domain in the USA.
  • As printed — materials: Coats Mercerized Crochet, No. 70; Hook No. 14. Gauge: Not given.
  • Modernisation note: Stitches converted by the book's own stitch key (“Abbreviation Stitches and How to Make Them”), not by name. Its slip stitch (sl st) = sl st. Its single stitch (s st: “insert the needle in the stitch directed, draw the working thread through this stitch, making two on the needle, then draw the working thread through these two loops”) = modern US sc. Its treble crochet (tr: thread around the needle once, draw through, then through two loops twice; “three chains equal one treble”) = modern US dc. Its double treble (dtr: thread around twice, loops worked off two at a time three times) = modern US tr. Its triple treble (tr tr: thread around three times) = modern US dtr. So every “s st” is written sc, every “tr” dc, and every “d tr” tr.
  • Modernisation note: Filet crochet as the book defines it: a space (sp) is 1 dc, ch 2, sk 2 sts, 1 dc (“For a space at the beginning of a row, chain five, which allows three for the treble on the edge, and two for the usual chain”); a block (bl, written “block” here) is dc worked in consecutive sts — “there are four trebles in the first block and three trebles in each following block”, so a row of blocks has 3 dc per block plus 1. Ch 3 at the beginning of a row counts as the first dc.
  • Modernisation note: The book's “New Method of Adding Meshes at Last End of Row” (book page 4), for rows where the directions or chart add meshes at the end of a row: instead of making the last dc of the block already there, ch 2 and sl st into the loop where that last dc would go; then ch long enough for the extra meshes (ch 6 for 1 mesh, ch 9 for 2, ch 12 for 3, adding 3 ch for each further mesh); turn and work spaces or blocks along the ch as the chart shows; sl st to the top of the last mesh before the added ch; turn, sl st to the end of the added meshes, and you are ready to start the next row. Adding meshes at the beginning of a row is done the usual way, by working extra blocks or spaces on a ch made at the end of the preceding row.
  • Modernisation note: Period wording modernised: s st, tr, d tr written as sc, dc, tr (see the stitch note); “bl” written as block; “sp” kept as sp (filet space); “p” written as picot; “needle” (the crochet hook) as hook; “throw cotton over” as yo; “skip” as sk; “fasten”/“fasten cotton” as join thread; “break cotton” as fasten off; “repeat” as rep; “drop off”/“leave off” meshes kept as printed (stop working over those meshes); ordinal row names (“1st Row”) written as Row 1, and “Row” is kept even where a piece is worked round (as the book does).
  • Modernisation note: Picot as the book defines it: “usually made by a chain of three or five, then a slip stitch in the first chain.” The size is not given in the individual designs, so use ch 3 (or ch 5 for a larger picot), sl st in the first ch.
  • Modernisation note: The filet charts (the book's “working patterns” or “design”) are printed as pictures and are not transcribed square by square here; rows that say “follow design” are kept as printed, and the chart page is listed with this pattern's images. Each chart square is one mesh: a filled square is a block, an open square is a space.
  • Modernisation note: Long printed paragraphs are split into one row or step per line; stitch order and counts unchanged. Section headings added for navigation.
  • Modernisation note: Hooks are 1921 steel crochet hook numbers; the book prints no diameters. The metric sizes given use the modern US steel-hook scale (No. 2 ≈ 2.2 mm, No. 7 ≈ 1.65 mm, No. 8 ≈ 1.5 mm, No. 10 ≈ 1.3 mm, No. 12 ≈ 1.0 mm, No. 13 ≈ 0.85 mm, No. 14 ≈ 0.75 mm) and are approximate only — period numbering may differ, so match the printed meshes to the inch instead. The book's own table pairs, for example, size 5 thread with a No. 2 hook for 3 meshes to the inch, size 70 thread with a No. 12 hook for 8 meshes, and size 100 thread with a No. 14 hook for 9½–10 meshes, and warns that “if the thread is loosely held, the meshes will increase to the inch”.
  • Modernisation note: Threads are 1921 J. & P. Coats products with no exact modern equivalent. Approximate modern equivalents: Coats Mercerized Crochet No. 30–100 as mercerized cotton crochet thread of the same size number; Coats Pearl Cotton No. 5 as size 5 pearl (perle) cotton. The book prints no yardage or ball counts, so no yardage is given.
  • Modernisation note: Title: the page heading is “Pointed Yoke”; the contents list it as “Pointed Yoke in Daisies”.
  • Modernisation note: Row 1 of the beading says “repeat from star” but prints no star; the * is placed at the start of the repeat.
  • Modernisation note: Check: “Ch 5. 1st Row—1 bl.” — a single block needs 4 dc; ch 5 allows for 1 extra ch. Follow the chart for the point.
  • Modernisation note: Check: Row 2 of the beading and edge (“chain 6, one treble in 2nd chain of 4 … one sl st in 2nd ch 4”) is kept as printed; the chains of 4 are those of Row 1.
  • Modernisation note: Check: the photograph on book page 21 shows the yoke laid flat; the page 20 chart shows the left half with the point and neck shaping.
Smart Pattern Companion

Row progress: 0 of 8 done (0%)

Yoke

0 of 8 done
  1. Start at lower edge of point on left sleeve, working crosswise.
    Mark row complete
  2. Ch 5.
    Mark row complete
  3. Row 1: 1 block.
    Mark row complete
  4. Row 2: Add 1 block at each edge: 1 block, 1 sp, 1 block.
    Mark row complete
  5. Continue to add blocks at each edge as shown in the design until the point on the shoulder is wide enough, then add meshes for the front and back.
    Mark row complete
  6. After it is made up to the side of the neck, leave off the front and work around the back.
    Mark row complete
  7. After that is finished, fasten off and start back at the shoulder and make the front.
    Mark row complete
  8. After that is finished, join the back and front on the right shoulder and work down the right sleeve.
    Mark row complete

Working on:

Start at lower edge of point on left sleeve, working crosswise.

Continue this pattern

The rest of the Pointed Filet Yoke with Daisies (1921) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Beading and edge around neck
  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Pointed Yoke pattern from?

It was published as "Pointed Yoke" in J. & P. Coats Crochet Book No. 7: Sweaters, Yokes, and Boudoir Caps (designed by Anne Orr) by J. & P. Coats, Pawtucket, R.I. in 1921. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Pointed Yoke?

Size 70 crochet cotton (approximate; original Coats Mercerized Crochet No. 70). Not printed.

What hook should I use?

Start with 0.75 mm (steel hook US steel No. 14) — approximate conversion of the printed No. 14 hook. No gauge is printed; the book's table gives about 8 meshes to the inch for size 70 thread. Gauge: No gauge printed (the book's table: size 70 thread, 8 meshes to the inch).

You might also like