Free preview · full pattern in the Vintage Crochet Fashion
Long Filet Sweater with Long Sleeves and Morning Glories (1921): vintage crochet pattern
A long open-front filet crochet sweater coat with long sleeves, worked crosswise in one piece from the lower back, with morning glory motifs at the hem, a matching morning glory band up the fronts and around the neck, cuffs, a solid sash with fringe and sash keepers.
By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

| Detail | Value |
|---|---|
| Skill level | Advanced |
| Yarn weight | Lace (#0) |
| Yardage | Not printed. (as printed; yardage not given) |
| Hook | 2.2 mm |
| Gauge | 4 filet meshes = 1 in (2.5 cm). |
| Finished size | Not printed. Back 81 meshes wide at 4 meshes to the inch (calculated: about 20¼ in / 51.5 cm); sash 8 blocks wide and 2¼ yards (2.1 m) long. |
| Time | about 9 hours |
Materials
- Lustrous mercerized cotton about as heavy as size 5 pearl cotton or size 3 crochet thread — approximate only; the original “Silk Finish” Crochet Cotton has no printed size, so match the gauge
- Steel crochet hook (original: No. 2)
- Tapestry needle
- Hook: Start with 2.2 mm (steel hook US steel No. 2) — approximate conversion of the printed No. 2 hook; change size to match the printed meshes to the inch.
Yarn Kit & Substitution Options
This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:
Caron Simply Soft · 100% Acrylic
315 yds per skein · High-yield yardage, silky no-scratch texture
2 skeins required
approx. $$10.98 total
Abbreviations (US terms)
- chain
- double crochet
- space
- repeat
- row
Notes before you start
- Source: "Long Sweater with Long Sleeves", J. & P. Coats Crochet Book No. 7: Sweaters, Yokes, and Boudoir Caps (designed by Anne Orr), J. & P. Coats, Pawtucket, R.I., 1921. Public domain in the USA.
- As printed — materials: Coats "Silk Finish" Crochet Cotton; No. 2 Hook. Gauge: 4 meshes to the inch.
- Modernisation note: Stitches converted by the book's own stitch key (“Abbreviation Stitches and How to Make Them”), not by name. Its slip stitch (sl st) = sl st. Its single stitch (s st: “insert the needle in the stitch directed, draw the working thread through this stitch, making two on the needle, then draw the working thread through these two loops”) = modern US sc. Its treble crochet (tr: thread around the needle once, draw through, then through two loops twice; “three chains equal one treble”) = modern US dc. Its double treble (dtr: thread around twice, loops worked off two at a time three times) = modern US tr. Its triple treble (tr tr: thread around three times) = modern US dtr. So every “s st” is written sc, every “tr” dc, and every “d tr” tr.
- Modernisation note: Filet crochet as the book defines it: a space (sp) is 1 dc, ch 2, sk 2 sts, 1 dc (“For a space at the beginning of a row, chain five, which allows three for the treble on the edge, and two for the usual chain”); a block (bl, written “block” here) is dc worked in consecutive sts — “there are four trebles in the first block and three trebles in each following block”, so a row of blocks has 3 dc per block plus 1. Ch 3 at the beginning of a row counts as the first dc.
- Modernisation note: The book's “New Method of Adding Meshes at Last End of Row” (book page 4), for rows where the directions or chart add meshes at the end of a row: instead of making the last dc of the block already there, ch 2 and sl st into the loop where that last dc would go; then ch long enough for the extra meshes (ch 6 for 1 mesh, ch 9 for 2, ch 12 for 3, adding 3 ch for each further mesh); turn and work spaces or blocks along the ch as the chart shows; sl st to the top of the last mesh before the added ch; turn, sl st to the end of the added meshes, and you are ready to start the next row. Adding meshes at the beginning of a row is done the usual way, by working extra blocks or spaces on a ch made at the end of the preceding row.
- Modernisation note: Period wording modernised: s st, tr, d tr written as sc, dc, tr (see the stitch note); “bl” written as block; “sp” kept as sp (filet space); “p” written as picot; “needle” (the crochet hook) as hook; “throw cotton over” as yo; “skip” as sk; “fasten”/“fasten cotton” as join thread; “break cotton” as fasten off; “repeat” as rep; “drop off”/“leave off” meshes kept as printed (stop working over those meshes); ordinal row names (“1st Row”) written as Row 1, and “Row” is kept even where a piece is worked round (as the book does).
- Modernisation note: Picot as the book defines it: “usually made by a chain of three or five, then a slip stitch in the first chain.” The size is not given in the individual designs, so use ch 3 (or ch 5 for a larger picot), sl st in the first ch.
- Modernisation note: The filet charts (the book's “working patterns” or “design”) are printed as pictures and are not transcribed square by square here; rows that say “follow design” are kept as printed, and the chart page is listed with this pattern's images. Each chart square is one mesh: a filled square is a block, an open square is a space.
- Modernisation note: Long printed paragraphs are split into one row or step per line; stitch order and counts unchanged. Section headings added for navigation.
- Modernisation note: Hooks are 1921 steel crochet hook numbers; the book prints no diameters. The metric sizes given use the modern US steel-hook scale (No. 2 ≈ 2.2 mm, No. 7 ≈ 1.65 mm, No. 8 ≈ 1.5 mm, No. 10 ≈ 1.3 mm, No. 12 ≈ 1.0 mm, No. 13 ≈ 0.85 mm, No. 14 ≈ 0.75 mm) and are approximate only — period numbering may differ, so match the printed meshes to the inch instead. The book's own table pairs, for example, size 5 thread with a No. 2 hook for 3 meshes to the inch, size 70 thread with a No. 12 hook for 8 meshes, and size 100 thread with a No. 14 hook for 9½–10 meshes, and warns that “if the thread is loosely held, the meshes will increase to the inch”.
- Modernisation note: Threads are 1921 J. & P. Coats products with no exact modern equivalent. Approximate modern equivalents: Coats Mercerized Crochet No. 30–100 as mercerized cotton crochet thread of the same size number; Coats Pearl Cotton No. 5 as size 5 pearl (perle) cotton. The book prints no yardage or ball counts, so no yardage is given.
- Modernisation note: “Meshes to the inch” is the book's gauge: count filet meshes (spaces or blocks) across 1 in (2.5 cm) of work.
- Modernisation note: Sizes are rarely printed; vintage fit and ease differ from today's. Widths marked “calculated” are ours, from the printed mesh count and meshes to the inch — compare them with a garment that fits before starting.
- Modernisation note: The chart page (book page 15) shows the back of the sweater with the morning glory hem, and patterns for the cuff and the collar (front and neck band).
- Modernisation note: Check: “When the sleeve is 45 meshes wide” — the sleeve is 54 meshes long; “wide” is read as the depth of the sleeve worked since the neck division. Follow the chart.
- Modernisation note: Check: “a p between every 3rd and 9th bl” is kept as printed; it probably means picots spaced alternately 3 and 9 blocks apart, or at every 3rd block. Compare with the photograph.
- Modernisation note: Check: the sash fringe length and the keepers' use (one row of 10 blocks, sewn to form a loop at each underarm seam) are not described further.
- Modernisation note: Check: the book gives no size for Coats “Silk Finish” Crochet Cotton; the modern thread suggestion is ours, chosen for 4 meshes to the inch with a No. 2 hook.
- Modernisation note: The sleeve directions are split into steps; counts unchanged.
- Modernisation note: Finishing line added.
- Modernisation note: Metric conversions added.
Row progress: 0 of 6 done (0%)
Back
0 of 6 done- Start at lower end of back, working crosswise.Mark row complete
- Ch 246.Mark row complete
- Rows 1 and 2: Each 81 blocks.Mark row complete
- Next 8 rows: Each 81 sp.Mark row complete
- Next row: Start the Morning Glory design and follow.Mark row complete
- After 89 rows are completed, add 1 sp at each end of each row for 7 rows.Mark row complete
Working on:
Start at lower end of back, working crosswise.
Continue this pattern
The rest of the Long Filet Sweater with Long Sleeves and Morning Glories (1921) pattern is in the Vintage Crochet Fashion
Still to come in the full pattern:
- Sleeves and fronts
- Band for cuff (make 2)
- Front and neck band
- Sash
- Keepers for sash (make 2)
- Finishing
Included with 71 patterns for $15 — $0.21 per pattern.

Errata
No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.
Your notes on this pattern
Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.
Frequently asked questions
Where is the Long Sweater with Long Sleeves pattern from?
It was published as "Long Sweater with Long Sleeves" in J. & P. Coats Crochet Book No. 7: Sweaters, Yokes, and Boudoir Caps (designed by Anne Orr) by J. & P. Coats, Pawtucket, R.I. in 1921. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.
What yarn or thread do I need for the Long Sweater with Long Sleeves?
Mercerized cotton to give 4 filet meshes to the inch (approximate; original Coats “Silk Finish” Crochet Cotton, size not printed). Not printed.
What hook should I use?
Start with 2.2 mm (steel hook US steel No. 2) — approximate conversion of the printed No. 2 hook; change size to match the printed meshes to the inch. Gauge: 4 filet meshes = 1 in (2.5 cm).






