Free preview · full pattern in the Heirloom Doilies & Tablecloths

Lucky Star Motif Doily (1941): vintage crochet pattern

Round 4½-inch star motifs with fill-ins, recommended for tablecloths, bedspreads, runners and chair sets. Originally published as "Lucky Star" in Old and New Favorites (Book No. 172) by The Spool Cotton Company in 1941, it is now in the public domain.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Lucky Star motifs, original photograph
White · EcruSave to Pinterest
Pattern at a glance
DetailValue
Skill levelAdvanced
Yarn weightLace (#0)
Yardage32–35 yd (29–32 m)
Hook1.4 mm
GaugeAs printed: Using the materials recommended, each motif measures 4½″ in diameter and requires about 35 yds. of thread. Fill-in requires about 4 yds.
Finished sizeEach motif 4½ in (11.5 cm) across; overall size depends on the number of motifs
Timeabout 6 hours

Materials

  • Size 20 mercerized crochet thread (printed: Clark's Big Ball Mercerized Crochet, size 20)
  • Yardage: About 35 yd per motif and 4 yd per fill-in, as printed
  • Tapestry needle, rustproof pins and starch for blocking
  • Hook: Start with a 1.4 mm (US 9) steel hook for size 20 thread and change size so one motif measures 4½ inches (the printed hook is Milward's No. 11).
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 35 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

1 skeins required

approx. $$5.49 total

Abbreviations (US terms)

chain
slip stitch
single crochet
double crochet
treble crochet
stitch
space
round
yarn over

Notes before you start

  • Source: "Lucky Star" (7144), Old and New Favorites (Book No. 172), The Spool Cotton Company, 1941. Public domain in the USA.
  • As printed — materials: CLARK’S BIG BALL MERCERIZED CROCHET, size 20. See thread information on page 22.; Milward’s Steel Crochet Hook No. 11.. Gauge: Using the materials recommended, each motif measures 4½″ in diameter and requires about 35 yds. of thread. Fill-in requires about 4 yds..
  • Modernisation note: Transcribed from the original publication; stitches, repeats and their order are unchanged.
  • Modernisation note: Run-on paragraphs split into one round, row or step per line.
  • Modernisation note: The source leaflets already use US crochet terms; only abbreviations and wording were modernised.
  • Modernisation note: Round/row labels rewritten in modern form (e.g. “2nd Round.” → “Rnd 2:”, “7th to 10th rnds incl:” → “Rnds 7–10:”)
  • Modernisation note: “thread over” → “yo” (yarn over)
  • Modernisation note: “break off” → “fasten off”
  • Modernisation note: Page numbers, page-continuation notes and illustration references removed.
  • Modernisation note: Hook numbers in the original are Milward's steel hook sizes; a starting size is suggested from the thread weight instead of converting the old numbering.
  • Modernisation note: The original lists: recommended uses — Tablecloths, bedspreads, runners, chair sets.
  • Modernisation note: Stitch counts have not been added; where the original prints a count it is kept as printed.
Smart Pattern Companion

Row progress: 0 of 14 done (0%)

Motif

0 of 14 done
  1. Starting at center, ch 8, join with sl st to form a ring.
    Mark row complete
  2. Rnd 1: Ch 5, * dc in ring, ch 2. Repeat from * 6 more times. Join last ch-2 with sl st to 3rd st of ch-5 first made (8 sps).
    Mark row complete
  3. Rnd 2: Sl st in ch-2 sp, ch 3, 2 dc in same sp, ch 2, * 3 dc in next sp, ch 2. Repeat from * around. Join last ch-2 with sl st to 3rd st of ch-3 first made.
    Mark row complete
  4. Rnd 3: Ch 3, dc in same place as sl st, * dc in next dc, 2 dc in next dc, ch 2, 2 dc in next dc. Repeat from * around, ending with ch 2. Join to 3rd st of ch-3 first made.
    Mark row complete
  5. Rnd 4: Ch 3, dc in same place as sl st, * dc in each of next 3 dc, 2 dc in next dc, ch 2, 2 dc in next dc. Repeat from * around, ending with ch 2. Join.
    Mark row complete
  6. Rnd 5: Ch 3, dc in same place as sl st, * dc in each of next 5 dc, 2 dc in next dc, ch 3, 2 dc in next dc. Repeat from * around, ending with ch 3. Join.
    Mark row complete
  7. Rnd 6: Sl st in next dc, ch 3, * dc in each of next 6 dc, ch 3, sc in ch-3 sp, ch 3, skip 1 dc, dc in next dc. Repeat from * around, ending with ch 3. Join.
    Mark row complete
  8. Rnd 7: Sl st in next dc, ch 3, * dc in each of next 4 dc, ch 4, sc in ch-3 sp, sc in next sc, sc in next ch-3 sp, ch 4, skip 1 dc, dc in next dc. Repeat from * around. Join.
    Mark row complete
  9. Rnd 8: Sl st in next dc, ch 3, * dc in each of next 2 dc, ch 5, sc in ch-4 sp, sc in each of next 3 sc, sc in next sp, ch 5, skip 1 dc, dc in next dc. Repeat from * around, ending with ch 5. Join.
    Mark row complete
  10. Rnd 9: Sl st in next dc, ch 3, 2 dc in same place as sl st, holding back the last loop of each dc on hook; yo and draw through all loops on hook, ch 1 to fasten (thus a 3-dc cluster is made—counting ch-3 as 1 dc); * ch 6, sc in ch-5 loop, sc in each of next 5 sc, sc in next loop, ch 6, skip 1 dc, 3-dc cluster in next dc. Repeat from * around, ending with ch 6, sl st in tip of 1st cluster made.
    Mark row complete
  11. Rnd 10: Sc in same place as sl st, ** ch 5, skip 3 sc, tr in next sc, * ch 2, tr in same sc. Repeat from * 2 more times, ch 5, sc in tip of next cluster. Repeat from ** around, ending with ch 5. Join.
    Mark row complete
  12. Rnd 11: Ch 6, dc in same place as sl st, * ch 3, 4 sc in ch-5 loop, sc in ch-2 sp, ch 3; in next ch-2 sp make dc, ch 3, dc; ch 3, sc in next ch-2 sp, 4 sc in next ch-5 loop, ch 3; in next sc make dc, ch 3, dc. Repeat from * around, ending with ch 3. Join with sl st to 3rd st of ch-6 first made.
    Mark row complete
  13. Rnd 12: Sl st in ch-3 sp, ch 6, dc in same sp, * ch 3, sc in next ch-3 sp, ch 2, skip 2 sc, sc in next sc, ch 2, sc in next sp, ch 3; in next ch-3 sp (between dc’s) make dc, ch 3, dc. Repeat from * around, ending with ch 3, sl st in 3rd st of ch-6 first made. Fasten and fasten off. This completes motif.
    Mark row complete
  14. Sew motifs together on wrong side with neat over-and-over stitches, joining 2 points of each motif to 2 points of adjacent motifs, leaving 2 points free on each motif, between joinings, to be filled in later.
    Mark row complete

Working on:

Starting at center, ch 8, join with sl st to form a ring.

Continue this pattern

The rest of the Lucky Star Motif Doily (1941) pattern is in the Heirloom Doilies & Tablecloths

Still to come in the full pattern:

  • Fill-In Lace

Included with 236 patterns for $19 — $0.08 per pattern.

See what's inside
Cover artwork for the vintage doilies and tablecloths collection: lace doilies in fine cotton thread with a steel hook

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Lucky Star pattern from?

It was published as "Lucky Star" in Old and New Favorites (Book No. 172) by The Spool Cotton Company in 1941. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Lucky Star?

Size 20 mercerized crochet thread. About 35 yd per motif and 4 yd per fill-in, as printed

What hook should I use?

Start with a 1.4 mm (US 9) steel hook for size 20 thread and change size so one motif measures 4½ inches (the printed hook is Milward's No. 11). Gauge: As printed: Using the materials recommended, each motif measures 4½″ in diameter and requires about 35 yds. of thread. Fill-in requires about 4 yds.

You might also like