Free preview · full pattern in the Heirloom Doilies & Tablecloths

Irish Crochet Doily (1910): vintage crochet pattern

A round doily built from five separately worked motifs: a wound centre star with seven stemmed rings, a padded shamrock, a three-leafed flower worked over the cord, a five-pointed star and a double circle for the outer edge, all joined with a bar filling.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Figure 29, the doily, with Figure 30, a quarter of it enlarged, and the centre star directions.
White · EcruSave to Pinterest
Pattern at a glance
DetailValue
Skill levelAdvanced
Yarn weightLace (#0)
Yardagethe book gives no thread quantity for any design. (as printed; yardage not given)
Hook1 mm
GaugeNo gauge printed. Work one motif, measure it, and let the thread and the tension of the padding cord set the size.
Finished sizeNot printed — the book gives no diameter for the doily.
Timeabout 8 hours

Materials

  • Size 30 to 50 crochet cotton — the book leaves the number to the worker; finer thread gives finer lace
  • A smooth firm padding cord: the original is a No. 30 linen lace thread, and the book doubles two long strands of it for most sprays. Several strands of the working thread held together are the usual substitute
  • A fine steel hook (see below)
  • A fine sewing needle for fastening the cord ends behind the stems
  • A ⅜-inch (1 cm) mesh pin, knitting needle or dowel to wind the heavy rings on
  • Hook: Start with 1.00 mm (US steel 11); change size until the thread runs easily without splitting and the motif lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
single crochet
half double crochet
double crochet
treble crochet
stitch
stitches
skip
repeat
row
round
loop
back loop only
front loop only

Notes before you start

  • Source: "Doily. Figure 29", Designs and Instructions for Irish Crochet Lace, T. Buettner & Co., Inc., Chicago and New York, 1910. Public domain in the USA.
  • As printed — materials: Manlove's Irish lace thread — made in sizes 36, 42, 50, 60, 70 and 80; the book leaves the size to the worker, “according to the fineness or coarseness of lace desired”; No. 30 Au Cheval Rouge Linen Lace Thread for the foundation, i.e. the padding cord; Any ordinary well made fine steel crochet needle; A mesh pin, for the wound rings. Gauge: Not given.
  • Modernisation note: Stitch key (British to modern US). The book lists “the ordinary crochet stitches, chain, single, double and treble”, joins its rings and closes its picots with a “single” (“join with a single stitch”; “1 single into the first of the 5 chain to form a picot”), calls the solid fabric worked over the padding cord “double stitch”, and grades its stitches double < half treble < treble < double treble. That is the older British and Irish naming, so: chain = ch; “single” and “single crochet” = slip stitch (sl st); “double”, “double stitch” and “double crochet” = modern US single crochet (sc); “half treble” = modern US half double crochet (hdc); “treble” = modern US double crochet (dc); “double treble” = modern US treble crochet (tr). Every stitch below has been rewritten in the modern US name on that basis.
  • Modernisation note: Check: the book prints no stitch definitions and no wrap counts, so the stitch key above is derived from how the names are used in the directions, not from a printed table.
  • Modernisation note: The book's other wording is written in modern form: “miss” = sk, “crochet needle” = hook, “repeat from” = rep from, “work 1 double into” = 1 sc in. Ordinal row names (“Second Row.”, “Third row”) are written Row 2, Row 3, and rounds worked continuously round a ring are written Rnd where the book itself calls them rounds. Section headings are the book's own where it prints them (First Petal, Second Leaf, Shamrock).
  • Modernisation note: The book prints each design as one or two solid paragraphs; these have been split into one row, round or step per line. Stitch order and counts are unchanged, including counts that do not add up against the previous row — those are the book's own.
  • Modernisation note: Almost everything here is worked over a padding cord (“over the cord” = the stitches enclose the cord; “on the cord alone” = a free loop of stitches over the cord with nothing worked into). The book's own warning is kept in the finishing steps: the shape is set by how tightly the cord is drawn, so the worker is expected to add or drop a stitch to keep the spray flat.
  • Modernisation note: Thread numbers are the 1910 trade numbering of the two brands the book names (Manlove's Irish lace thread, made in sizes 36, 42, 50, 60, 70 and 80; No. 30 Au Cheval Rouge linen lace thread for the padding cord). Modern sizes given below are approximate equivalents only — the numbering runs the same way, higher number = finer thread, but the diameters are not identical. The scan prints the fifth Manlove's size as “jo”; it is 70.
  • Modernisation note: The book gives no hook number at all — “any ordinary well made fine steel crochet needle is suitable for the work”. Every metric hook size below is a starting point chosen for the modern thread, not a conversion of a printed size.
  • Modernisation note: Check: no gauge and no finished measurement is printed for this design. Work one motif, measure it, and adjust the hook and the tension of the padding cord before making the rest.
  • Modernisation note: The heavy rings are wound on a ⅜-inch (about 1 cm) mesh pin; the page scan reads ⅜ where the OCR text renders it “34-inch” or “3%-inch”. For the smallest rings the book winds the thread round a lead pencil instead.
  • Modernisation note: The book prints the star's directions with two levels of repeat marks (* and **); both are kept.
  • Modernisation note: Check: the book names the star “five-pointed” but works the points “until there are 6 of these points”; both are left as printed.
  • Modernisation note: Check: the filling used between the motifs is shown only in a photograph (Figure 30a) — no directions are printed for it. Figure 30 is a quarter of the doily enlarged, for copying the arrangement.
  • Modernisation note: Check: no diameter, no motif counts and no picot chain counts are printed.
Smart Pattern Companion

Row progress: 0 of 4 done (0%)

Center star

0 of 4 done
  1. Wind some padding thread 20 times around a mesh pin, remove it, and into it work 28 sc; join.
    Mark row complete
  2. Row 2: * 2 sc into the next 2 sc, ch 4, 1 sc into the next sc, ch 5 for the stem, ch 16 to form a ring, and join to the 5th ch.
    Mark row complete
  3. Work 22 sc into the loop thus formed; join. ** 1 sc into the next sc, ch 4, 1 sc into the same, 1 sc into the next sc; rep from ** 10 times more.
    Mark row complete
  4. 6 sc over the ch 5 for the stem, 1 sc into the center ring, ch 4; rep from * 6 times more.
    Mark row complete

Working on:

Wind some padding thread 20 times around a mesh pin, remove it, and into it work 28 sc; join.

Continue this pattern

The rest of the Irish Crochet Doily (1910) pattern is in the Heirloom Doilies & Tablecloths

Still to come in the full pattern:

  • Shamrock
  • The 3-leafed flower
  • The five-pointed star in the outer edge
  • The double circle in the outer edge
  • Finishing

Included with 236 patterns for $19 — $0.08 per pattern.

See what's inside
Cover artwork for the vintage doilies and tablecloths collection: lace doilies in fine cotton thread with a steel hook

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Doily. Figure 29 pattern from?

It was published as "Doily. Figure 29" in Designs and Instructions for Irish Crochet Lace by T. Buettner & Co., Inc., Chicago and New York in 1910. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Doily. Figure 29?

Size 30 to 50 crochet thread. Not printed — the book gives no thread quantity for any design.

What hook should I use?

Start with 1.00 mm (US steel 11); change size until the thread runs easily without splitting and the motif lies flat. Gauge: No gauge printed. Work one motif, measure it, and let the thread and the tension of the padding cord set the size.

You might also like