Free preview · full pattern in the Vintage Crochet Hats, Bags & Accessories

Irish Crochet Collar with Jabot (1910): vintage crochet pattern

A collar and hanging jabot built from one spray of two flowers: a six-petal picot flower worked on a chain ring over the cord, and a five-petal flower with open and solid petals worked back and forth. Three sprays go into the jabot, single flowers into the collar, and the whole is filled with picot bars and edged.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Figure 15, the collar with jabot, with Figure 16, the spray, and the flower directions.
White · EcruSave to Pinterest
Pattern at a glance
DetailValue
Skill levelAdvanced
Yarn weightLace (#0)
Yardagethe book gives no thread quantity for any design. (as printed; yardage not given)
Hook1 mm
GaugeNo gauge printed. Work one motif, measure it, and let the thread and the tension of the padding cord set the size.
Finished sizeNot printed — the collar and jabot are worked to the size of the worker's own pink foundation pattern.
Timeabout 6 hours

Materials

  • Size 30 to 50 crochet cotton — the book leaves the number to the worker; finer thread gives finer lace
  • A smooth firm padding cord: the original is a No. 30 linen lace thread, and the book doubles two long strands of it for most sprays. Several strands of the working thread held together are the usual substitute
  • A fine steel hook (see below)
  • A fine sewing needle for fastening the cord ends behind the stems
  • Pink cotton lawn or cambric for the foundation pattern, plus basting thread
  • Hook: Start with 1.00 mm (US steel 11); change size until the thread runs easily without splitting and the motif lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
single crochet
half double crochet
double crochet
stitch
stitches
skip
repeat
row
loop
double crochet
back loop only

Notes before you start

  • Source: "Collar with Jabot. Figure 15", Designs and Instructions for Irish Crochet Lace, T. Buettner & Co., Inc., Chicago and New York, 1910. Public domain in the USA.
  • As printed — materials: Manlove's Irish lace thread — made in sizes 36, 42, 50, 60, 70 and 80; the book leaves the size to the worker, “according to the fineness or coarseness of lace desired”; No. 30 Au Cheval Rouge Linen Lace Thread for the foundation, i.e. the padding cord; Any ordinary well made fine steel crochet needle; A foundation of pink cambric cut to the exact size of the work to be made, for basting the sprays on. Gauge: Not given.
  • Modernisation note: Stitch key (British to modern US). The book lists “the ordinary crochet stitches, chain, single, double and treble”, joins its rings and closes its picots with a “single” (“join with a single stitch”; “1 single into the first of the 5 chain to form a picot”), calls the solid fabric worked over the padding cord “double stitch”, and grades its stitches double < half treble < treble < double treble. That is the older British and Irish naming, so: chain = ch; “single” and “single crochet” = slip stitch (sl st); “double”, “double stitch” and “double crochet” = modern US single crochet (sc); “half treble” = modern US half double crochet (hdc); “treble” = modern US double crochet (dc); “double treble” = modern US treble crochet (tr). Every stitch below has been rewritten in the modern US name on that basis.
  • Modernisation note: Check: the book prints no stitch definitions and no wrap counts, so the stitch key above is derived from how the names are used in the directions, not from a printed table.
  • Modernisation note: The book's other wording is written in modern form: “miss” = sk, “crochet needle” = hook, “repeat from” = rep from, “work 1 double into” = 1 sc in. Ordinal row names (“Second Row.”, “Third row”) are written Row 2, Row 3, and rounds worked continuously round a ring are written Rnd where the book itself calls them rounds. Section headings are the book's own where it prints them (First Petal, Second Leaf, Shamrock).
  • Modernisation note: The book prints each design as one or two solid paragraphs; these have been split into one row, round or step per line. Stitch order and counts are unchanged, including counts that do not add up against the previous row — those are the book's own.
  • Modernisation note: Almost everything here is worked over a padding cord (“over the cord” = the stitches enclose the cord; “on the cord alone” = a free loop of stitches over the cord with nothing worked into). The book's own warning is kept in the finishing steps: the shape is set by how tightly the cord is drawn, so the worker is expected to add or drop a stitch to keep the spray flat.
  • Modernisation note: Thread numbers are the 1910 trade numbering of the two brands the book names (Manlove's Irish lace thread, made in sizes 36, 42, 50, 60, 70 and 80; No. 30 Au Cheval Rouge linen lace thread for the padding cord). Modern sizes given below are approximate equivalents only — the numbering runs the same way, higher number = finer thread, but the diameters are not identical. The scan prints the fifth Manlove's size as “jo”; it is 70.
  • Modernisation note: The book gives no hook number at all — “any ordinary well made fine steel crochet needle is suitable for the work”. Every metric hook size below is a starting point chosen for the modern thread, not a conversion of a printed size.
  • Modernisation note: Check: no gauge and no finished measurement is printed for this design. Work one motif, measure it, and adjust the hook and the tension of the padding cord before making the rest.
  • Modernisation note: Metric conversions added in brackets; the inch measurements are the book's own.
  • Modernisation note: Typo kept visible: in Figure 16A the book prints “3 chain, 1 single into the first of 5 chain to form a picot” for the first picot and “5 chain” for the second; the chain count for the first picot is left as printed rather than corrected.
  • Modernisation note: Check: the book gives no chain count for the picots in the edging, and no directions for the little ring added to the centre of each flower.
  • Modernisation note: Check: the edging cross-reference is misprinted as “(See Fig. 13.)” — Figure 13 is the grape spray; the directions that follow are the edging itself.
Smart Pattern Companion

Row progress: 0 of 4 done (0%)

Figure 16A — the six-petal flower

0 of 4 done
  1. Take a long strand of padding thread and double it; be sure to have it long enough for all the stems and flowers. Over the cord thus formed work about 2 inches (5 cm) for a stem.
    Mark row complete
  2. Drop the cord, ch 18, join, and make each petal as follows: 24 sc over the cord, join to the stem, turn, work 2 sc over the cord into the next 2 sts, ch 3, 1 sl st into the first of the ch to form a picot, 24 sc over the cord into the next 20 sc, ch 5, 1 sl st into the first of the ch 5 to form a picot, 2 sc into the next 2 sc, 1 dc into the center ring.
    Mark row complete
  3. The next 5 petals are worked in the same way, except that when you come to the point of each, between the 2 sc where you turn, it must be joined to the preceding petal. Each petal should occupy 1 dc on the center ring.
    Mark row complete
  4. Now work sc over the cord for the stem, and then work on the cord alone for about 4 inches (10 cm).
    Mark row complete

Working on:

Take a long strand of padding thread and double it; be sure to have it long enough for all the stems and flowers. Over the cord thus formed work about 2 inches (5 cm) for a stem.

Continue this pattern

The rest of the Irish Crochet Collar with Jabot (1910) pattern is in the Vintage Crochet Hats, Bags & Accessories

Still to come in the full pattern:

  • Figure 16B — the five-petal flower
  • Making up
  • Shaping line
  • Edging
  • Finishing

Included with 202 patterns for $12 — $0.06 per pattern.

See what's inside
Cover artwork for the vintage hats and accessories collection: a crochet hat, purse and slippers

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Collar with Jabot. Figure 15 pattern from?

It was published as "Collar with Jabot. Figure 15" in Designs and Instructions for Irish Crochet Lace by T. Buettner & Co., Inc., Chicago and New York in 1910. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Collar with Jabot. Figure 15?

Size 30 to 50 crochet thread. Not printed — the book gives no thread quantity for any design.

What hook should I use?

Start with 1.00 mm (US steel 11); change size until the thread runs easily without splitting and the motif lies flat. Gauge: No gauge printed. Work one motif, measure it, and let the thread and the tension of the padding cord set the size.

You might also like