Free preview · full pattern in the Vintage Crochet Edgings & Trims

Amberley Point Lace (1891): vintage crochet pattern

A point lace worked lengthwise on a chain of twenty-nine, with a heading of ten open squares that stays the same width while the solid block below it grows two doubles a row, from three to twenty-one, to make a triangular point; two shells carry the work up the side.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Amberley Point Lace, No. 77, the name, the foundation and Rows 1 to 3, book page 85
Écru · WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelAdvanced
Yarn weightLace (#0)
YardageNot printed. (as printed; yardage not given)
Hook5 mm
GaugeNo gauge printed.
Finished sizeNot printed.
Timeabout 4 hours

Materials

  • Crochet cotton or linen thread — the book prints no size; its own section title names cotton and linen
  • Steel crochet hook to suit the thread
  • Tapestry needle for the ends
  • Hook: Check: the book prints no hook number for any design in this section, so no modern hook can be read across from a printed size. Match the hook to whatever thread you choose, and change size until the lace lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
single crochet
double crochet
stitch
stitches
shell
space
repeat
row

Notes before you start

  • Source: "Amberley Point Lace" (No. 77), Home Work: a choice collection of useful designs for the crochet and knitting needle, Rose Publishing Co. (Ltd.), Toronto, 1891. Public domain in the USA.
  • As printed — materials: Not printed — the book names no thread, thread number, hook number or brand for the designs in this section; its printed section title is “Designs for Crocheting in Cotton and Linen”.. Gauge: Not given.
  • Modernisation note: Stitches are converted by this book's own printed key, not by the look of the abbreviation. The key is headed “Terms used in Crochet” and stands at the head of PART ONE, SECTION I.—Terms and Stitches, BOOK PAGE 9 (image p-010.jpg), running onto book page 10 (image p-011.jpg). It prints ten entries: “Ch—Chain, a straight series of loops, each drawn with the hook through the preceding one.” “St—Stitch or Stitches.” “Sl st—Slip Stitch; put the hook through the work, thread over the hook, draw it through the stitch on the hook.” “S c—Single Crochet; having a stitch on the hook, put the hook through the work, thread over the hook, draw it through the work, thread over, draw it through the two stitches on the hook.” “D c—Double Crochet; having a stitch on the hook, put thread over the hook, then hook through the work, thread over, draw it through two stitches, thread over, draw it through the two remaining.” “Tr—Treble Crochet; like double, except that the thread is thrown twice round the hook before inserting the hook through the work. The stitches are worked off two at a time as in double crochet.” “H tr—Half Treble, sometimes called Short Treble crochet; like double crochet, except that when the three stitches are on the needle, instead of drawing thread through two stitches twice, it is drawn through all three at once.” “L tr—Long Treble; throw thread over needle three times before inserting hook in the work, work off two stitches at a time as in double crochet.” “P—Picot; make three, four, five, or as many chain stitches as you wish to have in the picot, and form them into a loop by making a single crochet or slip stitch on the first of them.” “Sh—Shell; this is usually made by putting two doubles, two chains, and two doubles in one stitch; or by putting three or more doubles in one stitch without chain stitches between.” “*—Star; this is used where certain stitches are to be repeated.” The heights are therefore MODERN US: the S c works off two loops (US single, not the British double); the D c works off three loops two at a time (US double); the Tr throws the thread twice (US treble); the L tr throws it three times (US double treble, written dtr here). The H tr is the decisive entry — it is defined as HALF OF THE DOUBLE, not of the treble, so despite its British-sounding name it is the modern US half double crochet, and its wording confirms that this book's D c really is the modern double. This book is therefore a hybrid: US heights under two British-flavoured names.
  • Modernisation note: The book's wording is written in modern US form: “make a chain of N stitches” = ch N; “miss” and “pass over” = sk; “catch” and “fasten” = sl st or join, according to what the row is doing; “throw the thread over” = yo; “needle” and “hook” both mean the hook and are written hook; “under” a chain = into the chain space; “the 4th st. of ch.” = the 4th chain; “repeat from *” = rep from *. The book's numbered paragraphs (“1.”, “2.”, “3.”) are its rows and are written Row 1, Row 2, Row 3. The book's spelling “scallop” is kept.
  • Modernisation note: The printed directions are already numbered row by row in this section, and are transcribed one row per line in the book's own order. The book's own sub-headings (Heading, For the edge, On the upper edge and so on) are kept as section headings. Stitch order and counts are unchanged and nothing is added; where the book stops without a stitch count, so does this transcription.
  • Modernisation note: This is a microform scan and the optical reading of it carries the usual slips; every figure below was read back against the page image at 220 dpi. Recurring slips in this book's scanned text are “d. o” and “d. ¢” for d. c., “s. o” and “a. c.” for s. c., “at.” and “ata.” for st. and sts., “Ist” for 1st, “lst” for 1st, “1” and “l” for the figure 1, and “Bhell” for Shell. The rows below follow what the printed page actually shows, and any place where the scan and the page disagree is listed as a Check note.
  • Modernisation note: No materials are printed for this design. This section of the book prints no thread brand, no thread number and no hook number for any of its designs — the only material guidance is the section's own printed title, “Designs for Crocheting in Cotton and Linen” (book page 23), which is recorded here as the book's own range rather than as this design's specification. Nothing is invented to fill the gap.
  • Modernisation note: No gauge is printed for this design; the book prints no gauge, tension or mesh count anywhere in this section. Work a sample and change hook size until the lace lies flat.
  • Modernisation note: No finished measurement is printed for this design. It is worked to the length of the piece it trims, so its length is set by that piece. The book's own word for its width is the one in the design's printed name — the designs called “Narrow” are narrow edgings.
  • Modernisation note: Check: no colour is printed for this design. The engravings photograph as a plain light thread. The section's printed title names cotton and linen as its materials but names no colour; white and écru are recorded here as the ordinary choices for such thread, not as this design's printed colour.
  • Modernisation note: No yardage is printed for this design, and none is estimated here — the book gives no thread size to estimate from.
  • Modernisation note: “Shell” is the book's own key term (Sh, book page 10): “two doubles, two chains, and two doubles in one stitch; or three or more doubles in one stitch without chain stitches between.” Each design in this section also states its own shell in its first row — this design's is transcribed exactly as that first row prints it — and “shell on shell” or “shell in shell” means work the whole group into the shell of the row below. Nothing is standardised across designs here; the book's local wording is kept.
  • Modernisation note: This design states its own shell in its first row — “Shell (3 d. c., 2 ch., 3 d. c.)” — and that local definition is used wherever the book says shell or shell in shell.
  • Modernisation note: This design runs across a page turn (book page 85 to book page 86, images p-080.jpg and p-081.jpg); both leaves are present and were read. The name, the foundation and Rows 1 to the opening of 3 are on page 85, and the close of Row 3 with Rows 4 to 11 and the closing repeat on page 86.
  • Modernisation note: From Row 4 onward every row is written only as a pair of references back to the starred passages in Rows 2 and 3, and the book never repeats the stitches in full. Those references are kept exactly as printed; nothing is expanded or filled in.
  • Modernisation note: Check: the book prints the foundation as “Make a chain of 29 stiches.”, with the misspelling; it is read as stitches and the printed form is recorded here.
  • Modernisation note: Check: the scan reads Row 1 as “1 d.c. in 18th st.” and “ce. in 2letst.”; the page image reads “1 d. c. in 13th st.” and “1 d. c. in 21st st.”, and the row's own run of odd numbers — 9th, 11th, 13th, 15th, 17th, 19th, 21st, 23rd, 25th, 27th, 29th — agrees.
  • Modernisation note: Check: the scan reads Row 2 as “(ratising 5 d.e. over the 3 d.c. in preceding row), shell in ehell”; the page image reads “(making 5 d. c. over the 3 d. c. in preceding row), shell in shell”.
  • Modernisation note: Check: the scan reads Row 11 as “1 a. C. in 7th d.c.” and the closing line as “Repeat {sum 2nd row.”; the page image reads “1 d. c. in 7th d. c.” and “Repeat from 2nd row.”
  • Modernisation note: No engraving is printed with this design.
Smart Pattern Companion

Row progress: 0 of 13 done (0%)

The point

0 of 13 done
  1. Ch 29.
    Mark row complete
  2. Row 1: Shell (3 dc, 2 ch, 3 dc) in the 3rd st, fasten in the 5th st with sc, ch 3, shell in the 7th st, 3 dc in the 9th st, ch 2, 1 dc in the 11th st, ch 2, 1 dc in the 13th st, ch 2, 1 dc in the 15th st, ch 2, 1 dc in the 17th st, ch 2, 1 dc in the 19th st, ch 2, 1 dc in the 21st st, ch 2, 1 dc in the 23rd st, ch 2, 1 dc in the 25th st, ch 2, 1 dc in the 27th st, 2 ch, 1 dc in the 29th or last st, ch 5; turn.
    Mark row complete
  3. Row 2: * One dc in the top of the next dc, ch 2, 1 dc in the top of the next dc, ch 2, and so on until you have 10 squares over the 10 in the preceding row; * then 1 dc in the same place with the last dc, 1 dc over the next dc, 2 dc over the next dc (making 5 dc over the 3 dc in the preceding row), shell in shell, fasten with sc in the last st of the shell in the preceding row, ch 3, shell in shell, fasten with dc under the 3 ch, and ch 3; turn.
    Mark row complete
  4. Row 3: * Shell in shell, fasten with sc in the last st of the shell, ch 3, shell in shell, * 7 dc over the 5 dc (making 2 dc over the 1st and last dc. Continue thus, each time, throughout the point), ch 2, 1 dc in the next dc, and so on till you have 10 squares over the preceding 10 (making the last square by fastening the last dc in the middle st of the 5 ch), 5 ch; turn.
    Mark row complete
  5. Row 4: Repeat from * to * in the 2nd row, 9 dc over the 7 dc, shell in shell, fasten with sc under the 3 ch, 3 ch, shell in shell, fasten with dc under the 3 ch, 3 ch; turn.
    Mark row complete
  6. Row 5: Repeat from * to * in the 3rd row, 11 dc over the 9 dc, 2 ch, repeat from * to * in the 2nd row, ch 5; turn.
    Mark row complete
  7. Row 6: Repeat from * to * in the 2nd row, 13 dc over the 11 dc, repeat from * to * in the 3rd row, fastening with sc under the 3 ch, ch 3; turn.
    Mark row complete
  8. Row 7: Repeat from * to * in the 3rd row, 15 dc over the 13 dc, 2 ch, repeat from * to * in the 2nd row, ch 5; turn.
    Mark row complete
  9. Row 8: Repeat from * to * in the 2nd row, 17 dc over the 15 dc, repeat from * to * in the 3rd row, fasten with 1 dc under the 3 ch, 3 ch; turn.
    Mark row complete
  10. Row 9: Repeat from * to * in the 3rd row, 19 dc over the 17 dc, 2 ch, repeat from * to * in the 2nd row, ch 5; turn.
    Mark row complete
  11. Row 10: Repeat from * to * in the 2nd row, 21 dc over the 19 dc, repeat from * to * in the 3rd row, fasten with dc under the 3 ch, 3 ch; turn. This completes one scallop.
    Mark row complete
  12. Row 11: Repeat from * to * in the 3rd row, 3 dc in the 1st dc, 2 ch, 1 dc in the 3rd dc, 2 ch, 1 dc in the 5th dc, 2 ch, 1 dc in the 7th dc, and so on till there are 10 squares over the 21 dc in the preceding row, ch 5; turn.
    Mark row complete
  13. Repeat from the 2nd row.
    Mark row complete

Working on:

Ch 29.

Continue this pattern

The rest of the Amberley Point Lace (1891) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Amberley Point Lace pattern from?

It was published as "Amberley Point Lace" in Home Work: a choice collection of useful designs for the crochet and knitting needle by Rose Publishing Co. (Ltd.), Toronto in 1891. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Amberley Point Lace?

See the materials list. Not printed.

What hook should I use?

Check: the book prints no hook number for any design in this section, so no modern hook can be read across from a printed size. Match the hook to whatever thread you choose, and change size until the lace lies flat. Gauge: No gauge printed.

You might also like