Free preview · full pattern in the Heirloom Doilies & Tablecloths
Center Piece Border No. 3 of Thirty-Seven Octagons (1915): vintage crochet pattern
A round border made of thirty-seven crocheted octagons joined by their chain loops. Single crochet gussets draw the inside of each octagon together, a cross-treble band finishes the inner edge, and eight rows of gussets, spaces and points shape the deep scalloped outer edge.
By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

| Detail | Value |
|---|---|
| Skill level | Advanced |
| Yarn weight | Lace (#0) |
| Yardage | the book gives 4 spools; spool length is not stated. (as printed; yardage not given) |
| Hook | 1.65 mm |
| Gauge | No gauge or measurement printed. |
| Finished size | Not printed. The border is made of 37 octagons joined in a circle. |
| Time | about 6 hours |
Materials
- Size 20 mercerized cotton crochet thread — approximate; the original was 4 spools of R. M. C. Cordonnet Special No. 20 (spool length not printed)
- Steel crochet hook (original: No. 7 steel hook)
- Linen centre and sewing thread
- Hook: Start with 1.65 mm (US steel 7) — approximate; change size so the octagons lie flat
Yarn Kit & Substitution Options
This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:
Caron Simply Soft · 100% Acrylic
315 yds per skein · High-yield yardage, silky no-scratch texture
2 skeins required
approx. $$10.98 total
Abbreviations (US terms)
- chain
- slip stitch
- single crochet
- double crochet
- treble crochet
- stitch
- stitches
- skip
- repeat
- round
- yarn over
- together
- shell
Notes before you start
- Source: "Center Piece Border No. 3" (No. 3), Richardson's Crochet Book No. 1 (Complete Instruction Book for Crocheting, Tatting and Smocking), Richardson Silk Company, Chicago and New York, 1915. Public domain in the USA.
- As printed — materials: 4 spools of Richardson's R. M. C. Cordonnet Special No. 20; A No. 7 Steel Hook. Gauge: Not given.
- Modernisation note: From Richardson's Crochet Book No. 1. Stitches converted by that book's own stitch key (“Crocheting Stitches — Terms Used”), not by name: chain stitch (ch) = ch; slip stitch (sl st), taking a stitch through a chain stitch and through the loop on the needle at the same time = sl st; single crochet (s c), insert, draw the thread through, thread over and draw through the 2 loops = sc; double crochet (d c), insert and draw a stitch through, then draw through 2 and through the 2 remaining loops — two work-offs of 2 = dc; treble crochet (t c), thread over twice, then draw through 2 loops three times = tr; “long treble” (thread over 3, 4 or more times, worked off 2 at a time) = dtr and longer trebles. So this 1915 book already uses modern US heights — its treble is the modern treble, not the modern double crochet.
- Modernisation note: The book's abbreviations are written in modern US form: ch = ch, sl st = sl st, s c = sc, d c = dc, t c = tr, p = picot, st(s) = st(s); “thread over” / “over” / “over twice” = yo / yo twice; “miss” and “skip” = sk; “needle” (the book's word for the crochet hook) = hook; “repeat from *” = rep from *. Ordinal row names (“First Row”, “Second Row”) are written Row 1, Row 2; where the book calls a circuit of a circular piece a “row”, that reading is given in the heading and the change is noted.
- Modernisation note: Long printed paragraphs are split into one row, round or step per line; stitch order and counts unchanged. Section headings added for navigation.
- Modernisation note: Hooks are printed only as Richardson steel hook numbers, with no diameters, so no exact metric size can be read from the books. The metric sizes given are approximate starting points read across to the modern US steel-hook scale (in which a higher number is finer); work a swatch and change size to match any printed measurement.
- Modernisation note: No stitch gauge is printed for this design; work a swatch and match any printed measurement (given in the modern gauge line) before starting.
- Modernisation note: The threads are 1915 Richardson trade names with no exact modern equivalent, and the books print no yardage except where quoted in the materials. The modern equivalents given are approximations only: R. M. C. Cordonnet and Cordonnet Special (the book says it “matches the D. M. C. thread”, sizes 3 to 150) as mercerized cotton crochet thread of the same size number; R. M. C. Perle Cotton (Art. 15 and 15-B in hanks, Art. 35 in balls, sizes 3, 5, 8 and 12) as modern pearl cotton of the same size; Richardson's Crochet and Knitting Silk (“Perfect”, ½ oz on the ball; “Our Art”, ¼ oz) as a fine silk or silk-blend crochet thread about the weight of size 10–20 cotton; Richardson's Tatting Silk (100 yd on the ball) as a fine hard-twisted silk thread about the weight of size 20–30 cotton; Bed Spread Thread on cones as a heavy cotton crochet thread about size 3–5. Grecian floss (a silk embroidery floss) is used only for embroidery where it is named.
- Modernisation note: The book calls each circuit a “Row”; because the piece is worked in circles these are written Round 1, Round 2, and so on.
- Modernisation note: The book's “gusset” is the wedge of single crochet that pulls each octagon's side in; the word is kept as printed.
- Modernisation note: Check: Round 1 of the octagon is printed “* 3 ch, 1 dec, 1 ch, 1 dc, repeat from twice” with the repeat mark missing after “from”; it is read as “rep from * twice”, and “1 dec” as “1 dc”.
- Modernisation note: Check: Round 2 of the outer edge says two single crochet worked together are to be worked off “as 1 d c”; the stitch drawn through both is a joined single crochet, and the printed word is kept.
- Modernisation note: Check: the linen centre shown in the photograph is not described; the finishing line is ours.
- Modernisation note: Check: the colour is not printed; the border photographs as white.
- Modernisation note: Metric conversions added.
Row progress: 0 of 6 done (0%)
Octagon (make 37)
0 of 6 done- Begin with 4 ch joined to form a ring.Mark row complete
- Round 1: Ch 3 to take the place of a dc, ch 1, 1 dc in the ring, *ch 3, 1 dc, ch 1, 1 dc; rep from * twice, ch 3, join to the top of the first ch-3.Mark row complete
- Round 2: Ch 3 for a dc, ch 1, 1 dc in the first st of the ch-3 of the last round, ch 6, 1 dc in the second following st, ch 1; rep 3 times and fasten as before.Mark row complete
- Round 3: Ch 3 for a dc, ch 1, 1 dc in the first of the ch-6, ch 8, 1 dc in the last of the ch-6, ch 1, 1 dc in the next space; rep 3 times and join.Mark row complete
- Round 4: Ch 3, ch 1, *1 dc in the first of the ch-8, ch 10, 1 dc in the last of the ch-8, ch 1, 1 dc in each of the next 3 spaces with ch 1 between, ch 1; rep around from *, join and fasten off.Mark row complete
- Make 37 octagons, joining them by working 10 sc in the ch-10 of the preceding octagon.Mark row complete
Working on:
Begin with 4 ch joined to form a ring.
Continue this pattern
The rest of the Center Piece Border No. 3 of Thirty-Seven Octagons (1915) pattern is in the Heirloom Doilies & Tablecloths
Still to come in the full pattern:
- Inside of the Octagons
- Outer Edge
- Finishing
Included with 236 patterns for $19 — $0.08 per pattern.

Errata
No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.
Your notes on this pattern
Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.
Frequently asked questions
Where is the Center Piece Border No. 3 pattern from?
It was published as "Center Piece Border No. 3" in Richardson's Crochet Book No. 1 (Complete Instruction Book for Crocheting, Tatting and Smocking) by Richardson Silk Company, Chicago and New York in 1915. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.
What yarn or thread do I need for the Center Piece Border No. 3?
Size 20 crochet cotton. Not printed — the book gives 4 spools; spool length is not stated.
What hook should I use?
Start with 1.65 mm (US steel 7) — approximate; change size so the octagons lie flat Gauge: No gauge or measurement printed.







