Free preview · full pattern in the Vintage Crochet Edgings & Trims

No. 228 Shell Edging (1915): vintage crochet pattern

A deep diamond-mesh edging built from fans of thirteen double crochet whose centres are caught down with five single crochet, with a picot scallop of nine chain worked around the points at the end. Originally published as "No. 228. Shell Edging" in Clark's Crochet Book by Miller-Clark Designing Company, St. Joseph, Missouri in 1915, it is now in.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

No. 228 Shell Edging — directions and the edging photographed in the book
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelAdvanced
Yarn weightLace (#0)
YardageNot printed. (as printed; yardage not given)
Hook1.3 mm
GaugeNo gauge printed.
Finished sizeNot printed; the edging is worked on a chain of 45 and repeated to the length wanted.
Timeabout 5 hours

Materials

  • Size 30 mercerized cotton crochet thread — approximate; the book prints no thread for this design, and names No. 30 crochet cotton for the designs where it does print one
  • Steel crochet hook — the book prints no hook for this design
  • Tapestry needle
  • Hook: Start with 1.3 mm (US steel 10) — approximate and not printed; change size until the work lies flat and matches the photograph
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
single crochet
double crochet
treble crochet
stitch
stitches
skip
repeat
row
loop

Notes before you start

  • Source: "No. 228. Shell Edging" (No. 228), Clark's Crochet Book, Miller-Clark Designing Company, St. Joseph, Missouri, 1915. Public domain in the USA.
  • As printed — materials: Not given. Gauge: Not given.
  • Modernisation note: Stitches are converted by this book's own key (“Key to Terms Used in This Book”, book page 2), not by name. The key defines: chain (ch); slip stitch (sl-st), drawing the thread through the stitch and the loop on the needle without throwing thread over; “double (d)” — put the needle through the work, draw a stitch through (2 on the needle), thread over and draw through both, which is the modern US single crochet; “treble (tr)” — thread over, put the needle through, draw a stitch through (3 on the needle), thread over and draw through 2, thread over and draw through the 2 remaining, which is the modern US double crochet; “double treble (dtr)” — thread over twice, cast off three times, the modern US treble; “triple treble (ttr)” — thread over three times, cast off four times, the modern US double treble. So throughout this transcription d = sc, tr = dc, dtr = tr and ttr = dtr. This book is one of the 1915 US books that uses the older British heights, so its “treble” must not be read as a modern treble.
  • Modernisation note: The book's shorthand is written in modern US form: ch = ch, sl-st = sl st, d = sc, tr = dc, dtr = tr, ttr = dtr, p = picot, pc = popcorn, cl = cluster, st(s) = st(s); “miss” = sk; “thread over (the hook)” = yo; “join” at the end of a circuit = sl st to join. Ordinal row names (“1st Row”, “2nd Row”) are written Row 1, Row 2 and so on; where the book calls a circuit of a piece worked in the round a “row”, it is written Rnd and the change is noted in the section heading.
  • Modernisation note: Picot (p) is the book's own: chain 3, 4 or 5 as you like, insert the hook in the first of those chains, thread over and draw through the chain stitch and the stitch on the hook. A triple picot is three picots in succession. Picots are written out as picots, with the book's chain count wherever it is printed.
  • Modernisation note: Long printed paragraphs are split into one row, round or step per line; stitch order and counts are unchanged. Section headings added for navigation.
  • Modernisation note: No thread and no hook are printed for this design, so the sizes suggested in the modern materials are ours and are a starting point only. The book names No. 30 crochet cotton wherever it names a thread at all, and that is the basis of the suggestion.
  • Modernisation note: Hooks are printed only as steel hook numbers (No. 8, No. 10 and No. 11 are the only ones named in the book) with no diameters, so no exact metric size can be read from it. The metric sizes given are approximate starting points read across to the modern US steel-hook scale, in which a higher number is finer; work a swatch and change size to match the photograph.
  • Modernisation note: No gauge is printed for this design — the book prints no gauge anywhere. Work a swatch and change hook size until the work lies flat and matches the photograph.
  • Modernisation note: The book names a thread for only a handful of designs, always as “No. 30 thread”, “No. 30 mercerized crochet cotton” or “knitting cotton”, and prints no yardage anywhere. The modern equivalents given here are approximations only: No. 30 crochet cotton reads as modern size 30 mercerized cotton crochet thread; “knitting cotton” reads as a heavier cotton crochet thread about size 3–5. No yardage is estimated, because none is printed.
  • Modernisation note: Rows 1 and 2 are printed in a narrow column at the head of the page and the rest in the wide column below; they are brought together here.
  • Modernisation note: The stitch the book calls dtr in Rows 3 and 13 is its double treble, which is the modern treble, and is written tr.
  • Modernisation note: Check: the printed “d under /ch” in Row 13 is read as sc under the ch-7; the stroke is a scanning slip.
  • Modernisation note: Check: the picot chain count is not printed; use the book's own picot of 3, 4 or 5 chain.
  • Modernisation note: Check: no colour is printed; the design photographs as white or ecru.
  • Modernisation note: No finished measurement is printed for this design.
  • Modernisation note: Metric conversions added where a measurement is printed.
Smart Pattern Companion

Row progress: 0 of 15 done (0%)

Edging

0 of 15 done
  1. Row 1: Ch 45, turn. Sc in the 9th st from the hook, (ch 5, sk 3 sts, sc in the 4th st) 8 times, ch 5, turn.
    Mark row complete
  2. Row 2: (13 dc under the ch-5, sc under the second ch-5, ch 7, sc in the 3rd ch-5) 2 times, 13 dc under the next ch-5, sc under the next ch-5, turn.
    Mark row complete
  3. Row 3: (Ch 7, sk 4 dc, 5 sc in 5 dc, ch 7, sc under the ch-7) twice, ch 7, sk 4 dc, 5 sc over 5 dc, ch 4, 1 tr in the ch-4, ch 7, turn.
    Mark row complete
  4. Row 4: (Sc in the ch-7, ch 7, sk 1 sc, 3 sc over 3 sc, sk 1 sc, ch 7, sc in the ch-7) 3 times, turn.
    Mark row complete
  5. Row 5: Ch 7, sc in the ch-7, (ch 7, sc in the ch-7, 13 dc under the next ch-7, sc in the next ch-7) 3 times, turn, sl st 4 sts.
    Mark row complete
  6. Row 6: (5 sc over the 5 centre dc, ch 7, sc in the next ch-7, ch 7) 3 times, sc in the ch-7, ch 7, turn.
    Mark row complete
  7. Row 7: (Sc in the ch-7, ch 7, sk 1 sc, 3 sc over 3 sc) 3 times, turn.
    Mark row complete
  8. Row 8: Sl st on the ch-7 3 sts, proceed as in Row 2.
    Mark row complete
  9. Row 9: (Sk 4 dc, 5 sc over 5 dc, ch 7, sc under the ch-7, ch 7) twice, sk 4 dc, 5 sc over 5 dc, turn, sl st 1.
    Mark row complete
  10. Row 10: (3 sc over 3 sc, ch 7, sc under the ch-7, ch 7, sc under the ch-7, ch 7) twice, sk 1 sc, 3 sc over 3 sc, ch 7, sc under the ch-7, turn.
    Mark row complete
  11. Row 11: Ch 7, sc under the ch-7, (ch 7, sc under the ch-7, 13 dc under the next ch-7, sc under the ch-7) twice, ch 7, turn.
    Mark row complete
  12. Row 12: (Sk 4 dc, 5 sc over dc, ch 7, sc under the ch-7, ch 7) twice, sc under the ch-7, ch 7, turn.
    Mark row complete
  13. Row 13: (Sc under the ch-7, ch 7, sc under the ch-7, ch 7, sk 1 sc, 3 sc over 3 sc, ch 7) twice, sc under the ch-7, ch 7, 1 tr under the same ch-7, ch 5, turn.
    Mark row complete
  14. Row 14: Proceed as in Row 2.
    Mark row complete
  15. Rep for the length wanted.
    Mark row complete

Working on:

Row 1: Ch 45, turn. Sc in the 9th st from the hook, (ch 5, sk 3 sts, sc in the 4th st) 8 times, ch 5, turn.

Continue this pattern

The rest of the No. 228 Shell Edging (1915) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Edge
  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the No. 228. Shell Edging pattern from?

It was published as "No. 228. Shell Edging" in Clark's Crochet Book by Miller-Clark Designing Company, St. Joseph, Missouri in 1915. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the No. 228. Shell Edging?

Size 30 crochet cotton (approximate; not printed). Not printed.

What hook should I use?

Start with 1.3 mm (US steel 10) — approximate and not printed; change size until the work lies flat and matches the photograph Gauge: No gauge printed.

You might also like