Free preview · full pattern in the Vintage Crochet Edgings & Trims

No. 208 Pillow Case Lace (1915): vintage crochet pattern

A narrow shell lace worked on a four-row repeat, the fourth row carrying a chain back into the earlier rows to build a fan of single crochet and chain loops at the outer edge. Originally published as "No. 208. Pillow Case Lace" in Clark's Crochet Book by Miller-Clark Designing Company, St. Joseph, Missouri in 1915, it is now.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

No. 208 Pillow Case Lace — directions page, with the lace photographed above
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
YardageNot printed. (as printed; yardage not given)
Hook1.3 mm
GaugeNo gauge printed.
Finished sizeNot printed; the lace is worked on a chain of 14 and repeated to the length wanted.
Timeabout 2 hours

Materials

  • Size 30 mercerized cotton crochet thread — approximate; the book prints no thread for this design, and names No. 30 crochet cotton for the designs where it does print one
  • Steel crochet hook — the book prints no hook for this design
  • Tapestry needle
  • Hook: Start with 1.3 mm (US steel 10) — approximate and not printed; change size until the work lies flat and matches the photograph
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
single crochet
double crochet
stitch
stitches
skip
repeat
row
shell

Notes before you start

  • Source: "No. 208. Pillow Case Lace" (No. 208), Clark's Crochet Book, Miller-Clark Designing Company, St. Joseph, Missouri, 1915. Public domain in the USA.
  • As printed — materials: Not given. Gauge: Not given.
  • Modernisation note: Stitches are converted by this book's own key (“Key to Terms Used in This Book”, book page 2), not by name. The key defines: chain (ch); slip stitch (sl-st), drawing the thread through the stitch and the loop on the needle without throwing thread over; “double (d)” — put the needle through the work, draw a stitch through (2 on the needle), thread over and draw through both, which is the modern US single crochet; “treble (tr)” — thread over, put the needle through, draw a stitch through (3 on the needle), thread over and draw through 2, thread over and draw through the 2 remaining, which is the modern US double crochet; “double treble (dtr)” — thread over twice, cast off three times, the modern US treble; “triple treble (ttr)” — thread over three times, cast off four times, the modern US double treble. So throughout this transcription d = sc, tr = dc, dtr = tr and ttr = dtr. This book is one of the 1915 US books that uses the older British heights, so its “treble” must not be read as a modern treble.
  • Modernisation note: The book's shorthand is written in modern US form: ch = ch, sl-st = sl st, d = sc, tr = dc, dtr = tr, ttr = dtr, p = picot, pc = popcorn, cl = cluster, st(s) = st(s); “miss” = sk; “thread over (the hook)” = yo; “join” at the end of a circuit = sl st to join. Ordinal row names (“1st Row”, “2nd Row”) are written Row 1, Row 2 and so on; where the book calls a circuit of a piece worked in the round a “row”, it is written Rnd and the change is noted in the section heading.
  • Modernisation note: Long printed paragraphs are split into one row, round or step per line; stitch order and counts are unchanged. Section headings added for navigation.
  • Modernisation note: No thread and no hook are printed for this design, so the sizes suggested in the modern materials are ours and are a starting point only. The book names No. 30 crochet cotton wherever it names a thread at all, and that is the basis of the suggestion.
  • Modernisation note: Hooks are printed only as steel hook numbers (No. 8, No. 10 and No. 11 are the only ones named in the book) with no diameters, so no exact metric size can be read from it. The metric sizes given are approximate starting points read across to the modern US steel-hook scale, in which a higher number is finer; work a swatch and change size to match the photograph.
  • Modernisation note: No gauge is printed for this design — the book prints no gauge anywhere. Work a swatch and change hook size until the work lies flat and matches the photograph.
  • Modernisation note: The book names a thread for only a handful of designs, always as “No. 30 thread”, “No. 30 mercerized crochet cotton” or “knitting cotton”, and prints no yardage anywhere. The modern equivalents given here are approximations only: No. 30 crochet cotton reads as modern size 30 mercerized cotton crochet thread; “knitting cotton” reads as a heavier cotton crochet thread about size 3–5. No yardage is estimated, because none is printed.
  • Modernisation note: Row 4 is printed as one running paragraph broken across a column; it is kept whole here as a single step, because the whole of it is worked before the repeat begins.
  • Modernisation note: Check: the printed “8d over 6ch, 4d over next Gch” and “catcn back” are read as 8 sc over the ch-6 and 4 sc over the next ch-6, and as “catch back”; the odd letters are scanning slips.
  • Modernisation note: Check: no colour is printed; the design photographs as white or ecru.
  • Modernisation note: No finished measurement is printed for this design.
  • Modernisation note: Metric conversions added where a measurement is printed.
Smart Pattern Companion

Row progress: 0 of 5 done (0%)

Lace

0 of 5 done
  1. Row 1: Ch 14, turn, dc in the 9th st from the hook, ch 2, dc in the same st, ch 1, sk 3 sts, dc in the next st, ch 5, turn.
    Mark row complete
  2. Row 2: 2 dc under the ch-2, ch 1, 2 dc under the same ch-2, ch 1, sk 1 st in the ch, dc in the next st, ch 5, turn.
    Mark row complete
  3. Row 3: Dc under the ch-1 in the shell, ch 2, dc under the same ch-1, ch 1, sk 1 st, dc in the next st, ch 5, turn.
    Mark row complete
  4. Row 4: Like Row 2, but ch 6 instead of ch 5 at the end; then catch a st back into the top of the dc at the end of Row 2, ch 6, catch back to the ch at Row 1, turn, 8 sc over the ch-6, 4 sc over the next ch-6, ch 6, catch back into the centre of the 8 sc over the ch-6 just finished, turn, 4 sc over the ch-6, ch 3, 2 sc, ch 3, 4 sc, 4 sc over the ch-6 where only 4 sc were made, ch 5.
    Mark row complete
  5. Rep from Row 1 for the length wanted.
    Mark row complete

Working on:

Row 1: Ch 14, turn, dc in the 9th st from the hook, ch 2, dc in the same st, ch 1, sk 3 sts, dc in the next st, ch 5, turn.

Continue this pattern

The rest of the No. 208 Pillow Case Lace (1915) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the No. 208. Pillow Case Lace pattern from?

It was published as "No. 208. Pillow Case Lace" in Clark's Crochet Book by Miller-Clark Designing Company, St. Joseph, Missouri in 1915. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the No. 208. Pillow Case Lace?

Size 30 crochet cotton (approximate; not printed). Not printed.

What hook should I use?

Start with 1.3 mm (US steel 10) — approximate and not printed; change size until the work lies flat and matches the photograph Gauge: No gauge printed.

You might also like