Free preview · full pattern in the Vintage Crochet Baby & Kids' Patterns

No. C119 Baby's Crocheted Bootees Lined with Silk (1916): vintage crochet pattern

Fine filet crochet bootees in size 30 thread: the upper is worked flat in open mesh and solid blocks with shaped decreases for the instep, an ankle strap is chained on at each side, and a separate oval sole is worked round and round in single crochet and shaped at toe and heel.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

No. C119 Baby Bootees — start of the filet directions
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelAdvanced
Yarn weightLace (#0)
YardageNot printed. The book prints a yardage for only one design in the whole volume, and not for this one. (as printed; yardage not given)
Hook1.3 mm
GaugeNo gauge printed.
Finished sizeNot printed; the upper is begun on a chain of 158 and the sole on a chain of 41.
Timeabout 9 hours

Materials

  • Size 30 mercerized cotton crochet thread — approximate; the original was 1 ball of Artamo Cordonnet No. 30
  • Steel crochet hook (original: No. 10 steel hook)
  • Pink satin for the lining, and narrow ribbon for a small bow
  • Tapestry needle
  • Hook: Start with 1.3 mm (US steel 10) — approximate; change size until the mesh is firm
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
single crochet
double crochet
stitch
stitches
row
round
repeat
skip
space
increase
decrease

Notes before you start

  • Source: "Baby Bootees No. C119" (C119), The Artamo Crochet Book No. 1, Bentley-Franklin Company, New York, 1916. Public domain in the USA.
  • As printed — materials: 1 Ball “ARTAMO” Cordonnet No. 30.; 1 Steel Crochet Hook No. 10.. Gauge: Not given.
  • Modernisation note: Stitches are converted by this book's own key (“The Rudimentary Stitches of Crochet”, book pages 2-3), not by name. The key defines: chain (ch); “single crochet (s. c.)”, sometimes called tight stitch or half stitch — draw up a loop and draw another loop through both loops on the needle, which is the modern US single crochet; “double crochet (d. c.)”, frequently called a plain — thread over, draw up a loop (3 loops on the needle), draw through 2, then draw through the 2 remaining, which is the modern US double crochet; “short double crochet” — thread over, draw up a loop, draw the thread through all 3 loops at once, which is the modern US half double crochet; “treble crochet (t or tr)” — thread over twice, draw up a loop (4 loops), then cast off 2 at a time three times, which is the modern US treble; “long treble crochet”, also called double treble in the directions — thread over three times and cast off 2 at a time until all loops are worked off, which is the modern US double treble; slip stitch, “sometimes called the quarter-stitch”. So throughout this transcription the book's s.c. = sc, d.c. = dc, short d.c. = hdc, t/tr = tr and long treble/double treble = dtr. This book's heights already match modern US usage, so no shift of names was needed.
  • Modernisation note: The book's wording is written in modern US form: “needle” = hook; “thread over (the needle)” = yo; “skip” = sk; “pick up a loop” = draw up a loop; “narrow” = decrease; “widen” = increase; “picked up on the double thread” = worked under both loops; “picked up on the back thread” = worked in the back loop only; “join in a ring” = sl st to join into a ring. Ordinal row and round names (“1st row”, “2nd round”) are written Row 1, Rnd 2 and so on.
  • Modernisation note: Long printed paragraphs are split into one row, round or step per line; stitch order and counts are unchanged. Section headings added for navigation.
  • Modernisation note: “Artamo” was a brand of cotton sold by the publisher and described on the book's back cover: Cordonnet, a six-cord crochet cable cord for crochet and lace making, in sizes 3, 5, 10, 15, 20, 30, 40, 50, 60, 70, 80 and 100; Crochet Perle, in white and fast colours, in sizes 3 and 5; and Four-Ply, four fine strands loosely twisted together, for embroidery. The modern equivalents given here are approximations only: Artamo Cordonnet reads as modern six-cord mercerized cotton crochet thread of the same number, Artamo Crochet Perle as modern pearl (perle) cotton of the same number, and Artamo Four-Ply as modern six-strand cotton embroidery floss. Sizes 15 and 25 are no longer commonly made; the nearest modern sizes are noted where they occur.
  • Modernisation note: Hooks are printed only as “Steel Crochet Hook No. …” or “Bone Crochet Hook No. …” with no diameters, so no exact metric size can be read from the book. The metric sizes given are approximate starting points read across to the modern US steel-hook scale, in which a higher number is finer. Check: the old bone-hook numbers were never standardised and do not line up with any modern scale, so the millimetre size suggested for a bone hook is ours; work a swatch and change size to match the photograph.
  • Modernisation note: No gauge is printed for this design. Work a swatch and change hook size until the work lies flat and matches the photograph.
  • Modernisation note: The book's own shorthand for filet is kept in meaning but written out: it prints a bracketed key, “O in directions stands for open mesh, made with 2 chain stitches and 1 d.c.”, and writes “1-0” for one open mesh and “26-0” for twenty-six. Those are written “1 open mesh” and “26 open meshes” here.
  • Modernisation note: The book prints every repeat of “1-0, 3 dc.” separately, dozens to a row; identical consecutive repeats are collected into bracketed counts here — for example “(1 open mesh, 3 dc) 12 times” — and nothing is added or removed. The counts were taken from the page image, not from the scanned text, because the scan drops characters in these long rows.
  • Modernisation note: Corrected obvious scanning slips against the page image: the foundation row reads “155 dc. on ch.” (the plain text file renders it 135), and Row 3 ends with 26 open meshes at both ends.
  • Modernisation note: The second side of the bootee is printed without row numbers, as a run of instructions after Row 13; it is kept unnumbered here for that reason.
  • Modernisation note: Check: the book numbers a row 13 twice — once ending the first side of the upper and once in the sole — and gives no stitch totals anywhere, so the mesh counts should be checked against the photograph as the work grows.
  • Modernisation note: Check: no shoe size or finished length is printed.
  • Modernisation note: Check: no colour is printed beyond the thread named in the materials.
  • Modernisation note: Metric conversions added where a measurement is printed; the printed inches are unchanged.
Smart Pattern Companion

Row progress: 0 of 14 done (0%)

Upper

0 of 14 done
  1. An open mesh is made with 2 chain sts and 1 dc.
    Mark row complete
  2. Ch 158, turn, 155 dc on the chain.
    Mark row complete
  3. Row 2: Ch 3, 2 dc, (1 open mesh, 3 dc) 12 times, 1 open mesh, 12 dc, sk 1 st, 12 dc, (1 open mesh, 3 dc) 13 times, ch 5; turn.
    Mark row complete
  4. Row 3: 26 open meshes, 6 dc skipping 1 st between each dc, sk 2 sts, 6 dc skipping 1 st between each dc, 26 open meshes, ch 3; turn.
    Mark row complete
  5. Row 4: 1 dc in the first open mesh, 1 dc in the next dc, 1 dc in the next open mesh, 1 dc in the next dc. Make 1 open mesh and 3 dc alternately 11 times, 6 dc, sk 1 st, 2 dc, sk 1 st, 6 dc, (1 open mesh, 3 dc) 11 times, 1 open mesh, 5 dc, ch 5, and turn.
    Mark row complete
  6. Row 5: 25 open meshes, 1 dc, sk 1 st, 3 dc, sk 1 st, 2 dc, sk 1 st, 3 dc, sk 1 st, 1 dc, 25 open meshes, ch 3, and turn.
    Mark row complete
  7. Row 6: 2 dc, (1 open mesh, 3 dc) 11 times, 1 open mesh, 5 dc, sk 1 st, 2 dc, sk 1 st, 5 dc, (1 open mesh, 3 dc) 12 times, ch 5, and turn.
    Mark row complete
  8. Row 7: 25 open meshes, 2 dc, sk 1 st, 2 dc, sk 1 st, 2 dc, 25 open meshes, ch 3, and turn.
    Mark row complete
  9. Row 8: 5 dc, (1 open mesh, 3 dc) 11 times, sk 2 sts, 2 dc, sk 2 sts, 2 dc, sk 2 sts, 3 dc, (1 open mesh, 3 dc) 9 times, 1 open mesh, 6 dc, ch 5, and turn.
    Mark row complete
  10. Row 9: 12 open meshes, 1 dc, (1 dc in the space, 3 dc) 5 times, 1 dc in the space, (sk 1 st, 1 dc) 5 times, (1 dc in the space, 3 dc) 5 times, 1 dc in the space, 1 dc, 12 open meshes, ch 3, and turn.
    Mark row complete
  11. Row 10: 2 dc, (1 open mesh, 3 dc) 5 times, ch 25, and turn.
    Mark row complete
  12. Row 11: 23 dc in the chain, 1 dc, 11 open meshes, ch 3, and turn.
    Mark row complete
  13. Row 12: 5 dc, (1 open mesh, 3 dc) 9 times, ch 2, and turn.
    Mark row complete
  14. Row 13: Dc in every st to the end of the row.
    Mark row complete

Working on:

An open mesh is made with 2 chain sts and 1 dc.

Continue this pattern

The rest of the No. C119 Baby's Crocheted Bootees Lined with Silk (1916) pattern is in the Vintage Crochet Baby & Kids' Patterns

Still to come in the full pattern:

  • Second side of the upper
  • Sole
  • Finishing

Included with 133 patterns for $12 — $0.09 per pattern.

See what's inside
Cover artwork for the vintage baby sets collection: a crochet bonnet, booties and sacque in soft yarn

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Baby Bootees No. C119 pattern from?

It was published as "Baby Bootees No. C119" in The Artamo Crochet Book No. 1 by Bentley-Franklin Company, New York in 1916. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Baby Bootees No. C119?

Size 30 crochet cotton. Not printed. The book prints a yardage for only one design in the whole volume, and not for this one.

What hook should I use?

Start with 1.3 mm (US steel 10) — approximate; change size until the mesh is firm Gauge: No gauge printed.

You might also like