Free preview · full pattern in the Vintage Crochet Edgings & Trims
Figure 22 Torchon Edging with Corner (1916): vintage crochet pattern
A torchon-style edging worked back and forth over 43 rows: a fan of trebles with chain-1 between grows and shrinks in the lower half of the design while a field of chain-5 meshes does the opposite above it, and the last 26 rows turn a mitred corner.
By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

| Detail | Value |
|---|---|
| Skill level | Advanced |
| Yarn weight | Lace (#0) |
| Yardage | the book gives no thread quantity for any design. (as printed; yardage not given) |
| Hook | 0.85 mm |
| Gauge | No gauge printed. Work a sample repeat and match the hook to the thread. |
| Finished size | Not printed — the piece is worked to the length required. |
| Time | about 14 hours |
Materials
- Size 70 crochet thread — approximate modern equivalent of the book's No. 70 crochet cotton
- 0.85 mm steel hook (US steel 13) — approximate for the book's No. 13 hook
- Fine tapestry or sewing needle for the ends
- Hook: Start with 0.85 mm (US steel 13) — approximate for the book's No. 13 hook; change size until the thread runs easily without splitting and the lace lies flat.
Yarn Kit & Substitution Options
This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:
Caron Simply Soft · 100% Acrylic
315 yds per skein · High-yield yardage, silky no-scratch texture
2 skeins required
approx. $$10.98 total
Abbreviations (US terms)
- chain
- double crochet
- slip stitch
- stitch
- stitches
- skip
- space
- repeat
- row
- loop
Notes before you start
- Source: "Figure 22. Torchon Edging", The Priscilla Crochet Book: Edgings and Insertions, No. 2 (Edited by Belle Robinson), The Priscilla Publishing Company, Boston, 1916. Public domain in the USA.
- As printed — materials: Crochet cotton No. 70 — the book's Materials paragraph says “crochet cotton” means the hard-twisted cotton sold as Cordonnet, Cordonnet Special, Cordichet, Kord-net and similar; Hook No. 13. Gauge: Not given.
- Modernisation note: Stitches converted by the book's own “Explanation of Stitches” (printed page 3), not by name. This book uses the older British-style naming, so its stitch names do NOT match modern US names: chain (ch) = ch; slip stitch (sl) = sl st; “double” (d), “put hook through work, draw thread through work (making two loops on the hook); thread over again and through both loops” = modern US single crochet (sc) — the book itself notes this stitch “has been, especially in wool crochet, called ‘single crochet’”; “half treble” (ht), thread over, through work, “thread over and through all three sts at once” = modern US half double crochet (hdc); “treble” (t), thread over, through work, “thread over and through two loops, thread over and again through two loops” = modern US double crochet (dc); “double treble” (dt), thread over twice and worked off by twos three times = modern US treble crochet (tr); “long treble” (lt) or “triple treble” (tt), thread over three times and crocheted off by twos = modern US double treble (dtr); “quadruple treble” (qt), thread over four times = modern US triple treble (trtr). Every stitch in these instructions has been rewritten in the modern US name and abbreviation on that basis.
- Modernisation note: The book's abbreviations are written in modern US form: d = sc, ht = hdc, t = dc, dt = tr, lt/tt = dtr, st(s) = st(s), sp = sp, p = picot, blk = block, “miss” = sk, “thread over (the hook)” = yo, “repeat” = rep, “needle” (where it is used for the crochet hook) = hook. Ordinal row names (“1st row”, “2d row”) are written Row 1, Row 2, and “1st round”/“2d round” as Rnd 1, Rnd 2. Section headings (Heading, Edge, Lower Edge, Filling) are the book's own where it prints them.
- Modernisation note: The book prints each design as one or two solid paragraphs; these have been split into one row, round or step per line. Stitch order and counts are unchanged. Where the book's own repeat markers (*, **, ***) span several lines they are kept as printed.
- Modernisation note: Thread sizes are the book's own numbering. Its Materials paragraph says that “where the words ‘crochet cotton’ are used in the text of this book, the cotton referred to is the hard-twisted cotton known by such names as Cordonnet, Cordonnet Special, Cordichet, Kord-net, etc.” “No. N crochet cotton” is given below as modern size N crochet thread, which is an approximation: modern size numbering runs the same way (higher number = finer thread) but the exact diameters are not identical. No yardage is printed anywhere in the book, so none is given here.
- Modernisation note: Hook sizes are the book's own steel numbering. The 1916 steel numbering is not identical to the modern one, so every metric size below is approximate and should be adjusted to the thread.
- Modernisation note: No gauge and no finished measurements are printed for this design; work a sample repeat and adjust the hook until the lace lies flat at the width you want.
- Modernisation note: Metric conversions added.
Row progress: 0 of 42 done (0%)
Torchon Edging
0 of 42 done- Ch 48, turn.Mark row complete
- Row 1: Sl st in the 8th st of the ch, (ch 5, sl st in the 5th st) 3 times, ch 5, sk 4, 4 dc in the next 4 sts, ch 5, sk 4, 4 dc in the next 4 sts, ch 5, sk 4, dc in the next st, ch 1, sk 1, dc in the next, ch 1, sk 1, dc in the next, ch 5, turn.Mark row complete
- Row 2: (1 dc, ch 1, 1 dc) over the ch-1, ch 1, 1 dc over the next ch, ch 1, (1 dc, ch 1, 1 dc) over the next ch, ch 5, * 2 dc over the 3rd and 4th dc, 2 dc over the ch, ch 5; rep from *, sl st over the middle of the ch-5, * ch 5, sl st on the ch * (from * to * will be called a mesh), make 2 more meshes, ch 5, turn.Mark row complete
- Row 3: Sl st on the 1st mesh, make 2 more meshes, * ch 5, 2 dc over the last sts of the ch, 2 dc over 2 dc; rep from *, ch 5, (1 dc, ch 1, 1 dc) over the last of the ch-5, (ch 1, 1 dc) over each of the next 3 chs, ch 1, (1 dc, ch 1, 1 dc) over the next ch, ch 5, turn.Mark row complete
- Row 4: Like Row 2 except there will be 9 dc in the lower section of the design and but 3 meshes in the upper design.Mark row complete
- Row 5: Like Row 3 except 3 meshes in the upper design and 11 dc in the lower.Mark row complete
- Row 6: Like Row 4 except 13 dc below and 2 meshes above.Mark row complete
- Row 7: Like Row 5 except 2 meshes above and 15 dc below.Mark row complete
- Row 8: Like Row 6 except 17 dc below and 1 mesh above. It is helpful to notice that Row 8 is the centre of the scallop and is worked from below to the top.Mark row complete
- Row 9: Sl st on the 1st mesh, ch 5, * 2 dc over the 3rd and 4th dc, 2 dc over the ch, * ch 5, make from * to * again, ch 5, dc between the 2nd and 3rd dc, * ch 1, dc over the next ch *; rep from * to * until there are 15 dc altogether, ch 5, turn.Mark row complete
- Row 10: Dc over the 1st ch, * ch 1, dc over the next ch *; rep until there are 13 dc, (ch 5, 2 dc over the ch, 2 dc over 2 dc) rep, 2 meshes, ch 5, turn.Mark row complete
- Row 11: Like Row 9 except 11 dc below and 3 meshes above.Mark row complete
- Rows 12, 13 and 14: Continue in the same way, increasing the meshes above and decreasing the dc below.Mark row complete
- Row 15: Like Row 1, except ch 5, sl st on the 1st mesh.Mark row complete
- Row 16: Like Row 2.Mark row complete
- Row 17: Like Row 3.Mark row complete
- Row 18: Commencing the corner, the same as Row 4, omitting the last mesh, turn.Mark row complete
- Row 19: Sl st to the 3rd st of the ch, ch 5, 2 dc over the ch, 2 dc over 2 dc, continue as in Row 5.Mark row complete
- Row 20: Like Row 6 to, and including, the upper block.Mark row complete
- Row 21: Sl st down the block and 5 sts of the ch, ch 2 for 1 dc, 1 dc over the ch, 2 dc over 2 dc, continue as in Row 7.Mark row complete
- Row 22: Like Row 8 to, and including, 2 dc over the ch, ch 3, turn.Mark row complete
- Row 23: Dc between the 2nd and 3rd dc, continue as in Row 9.Mark row complete
- Row 24: Like Row 10, to within 2 dc of the top of the lower design, ch 3, turn.Mark row complete
- Row 25: Dc between the 2nd and 3rd dc, continue as in Row 11.Mark row complete
- Row 26: Like Row 12 to within 2 dc of the top, ch 3, turn.Mark row complete
- Row 27: Dc between the 2nd and 3rd dc, continue as in Row 13.Mark row complete
- Row 28: Like Row 14 to within 2 dc of the top, ch 3, turn.Mark row complete
- Row 29: Dc between the 2nd and 3rd dc, continue as in Row 15.Mark row complete
- Row 30: Like Row 2 up to 2 dc over the ch (inclusive), ch 4, sl st in the upper mesh opposite, ch 3, turn.Mark row complete
- Row 31: 2 dc over the ch, continue as in Row 3.Mark row complete
- Row 32: Like Row 4 up to 2 dc over the ch, ch 4, sl st in the upper mesh opposite, ch 3, turn.Mark row complete
- Row 33: 2 dc over the ch, continue as in Row 5.Mark row complete
- Row 34: Like Row 6 to 2 dc over the ch, ch 4, sl st in the upper mesh opposite, ch 3, turn.Mark row complete
- Row 35: 2 dc over the ch, continue as in Row 7.Mark row complete
- Row 36: Like Row 8 to 2 dc over the ch, ch 7, sl st in the last dc of the block, ch 7, catch in the last dc of the next block, turn.Mark row complete
- Row 37: Sl st down 5 sts of the ch-7 (the last 2 sts equal to 1 dc), 3 dc over the ch, ch 5, dc between the 2nd and 3rd dc, continue as in Row 9.Mark row complete
- Row 38: Like Row 10 until there are 13 dc, ch 5, 2 dc over the ch, 2 dc over 2 dc, ch 5, 4 dc over the ch, ch 5, sl st in the 2nd mesh, ch 5, sl st in the last mesh, ch 5, turn.Mark row complete
- Row 39: Like Row 11.Mark row complete
- Row 40: Like Row 12.Mark row complete
- Row 41: Like Row 13.Mark row complete
- Row 42: Like Row 14.Mark row complete
- Row 43: Like Row 15.Mark row complete
Working on:
Ch 48, turn.
Continue this pattern
The rest of the Figure 22 Torchon Edging with Corner (1916) pattern is in the Vintage Crochet Edgings & Trims
Still to come in the full pattern:
- Finishing
Included with 618 patterns for $9 — $0.01 per pattern.

Errata
No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.
Your notes on this pattern
Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.
Frequently asked questions
Where is the Figure 22. Torchon Edging pattern from?
It was published as "Figure 22. Torchon Edging" in The Priscilla Crochet Book: Edgings and Insertions, No. 2 (Edited by Belle Robinson) by The Priscilla Publishing Company, Boston in 1916. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.
What yarn or thread do I need for the Figure 22. Torchon Edging?
Size 70 crochet thread. Not printed — the book gives no thread quantity for any design.
What hook should I use?
Start with 0.85 mm (US steel 13) — approximate for the book's No. 13 hook; change size until the thread runs easily without splitting and the lace lies flat. Gauge: No gauge printed. Work a sample repeat and match the hook to the thread.






