Free preview · full pattern in the Vintage Crochet Edgings & Trims
Figure 47 Twisted Braid Ring Edging (1913): vintage crochet pattern
Sections of braid twisted under into groups of three rings, caught with a single crochet at each crossing, then worked over with picot loops, cross trebles and a heading of chain and double crochet. Originally published as "Figure 47. Edging" in The Priscilla Crochet Book: Edgings and Insertions by The Priscilla Publishing Company, Boston in 1913, it is.
By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

| Detail | Value |
|---|---|
| Skill level | Advanced |
| Yarn weight | Lace (#0) |
| Yardage | the book gives no thread quantity for any design. (as printed; yardage not given) |
| Hook | 0.75 mm |
| Gauge | No gauge printed. Work a sample repeat and match the hook to the thread. |
| Finished size | Not printed — the piece is worked to the length required. |
| Time | about 3 hours |
Materials
- Size 100 crochet thread — approximate modern equivalent of No. 100 Cordonnet crochet cotton
- 0.75 mm steel hook (US 14) — approximate for the book's No. 13 hook
- Fine tapestry or sewing needle for the ends
- Sectioned lace braid — the book gives no width, brand or yardage for this design
- Hook: Start with 0.75 mm (US steel 14) — approximate for the book's No. 13 hook; change size until the thread runs easily without splitting and the lace lies flat.
Yarn Kit & Substitution Options
This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:
Caron Simply Soft · 100% Acrylic
315 yds per skein · High-yield yardage, silky no-scratch texture
2 skeins required
approx. $$10.98 total
Abbreviations (US terms)
- chain
- slip stitch
- single crochet
- double crochet
- double treble crochet
- stitch
- stitches
- yarn over
- loop
- repeat
- row
Notes before you start
- Source: "Figure 47. Edging", The Priscilla Crochet Book: Edgings and Insertions, The Priscilla Publishing Company, Boston, 1913. Public domain in the USA.
- As printed — materials: No. 100 Cordonnet crochet cotton — from the book's general Materials paragraph: all of the edgings shown were made of No. 100 Cordonnet crochet cotton except those in which the number of cotton is specified in the directions; No. 13 hook — the book directs a No. 13 hook for No. 100 cotton and a No. 12 hook for No. 70 cotton, and for coarser cottons a hook that will carry the thread easily without splitting it; Braid worked in sections (the design twists every third section of the braid into a ring). Gauge: Not given.
- Modernisation note: Stitches converted by the book's own “Explanation of Stitches” (printed page 3), not by name. This book uses the older British-style naming, so its stitch names do NOT match modern US names: chain (ch) = ch; slip stitch (sl st) = sl st; “double” (d), “put hook through work, thread over hook and draw through, making two loops on needle; thread over again and draw through both loops” = modern US single crochet (sc); “half treble” (h t), thread over, draw through, then “draw through the three sts at once” = modern US half double crochet (hdc); “treble” (t), thread over, draw through, “draw through two, over again and draw through remaining two” = modern US double crochet (dc); “double treble” (d t), thread over twice and work off by twos three times = modern US treble crochet (tr); “long treble” (l t), thread over three times and “work all off by twos” = modern US double treble (dtr). Every stitch in these instructions has been rewritten in the modern US name and abbreviation on that basis.
- Modernisation note: The book's picot (p) is defined on the same page: “A p is formed on a ch by joining the last four sts (or any given number) in a ring by working a d in the fourth st, counting from hook. In making p on d around the edge of motifs, the d is worked in the top of the last d.” Picots are written out as “picot” with the chain count the design gives, since the site's abbreviation list has no picot entry.
- Modernisation note: The book's abbreviations are written in modern US form: d = sc, h t = hdc, t = dc, d t = tr, l t = dtr, st(s) = st(s), sp = sp, l = lp, bl = block, “miss” = sk, “thread over (the hook/needle)” = yo, “repeat” = rep, “needle” (for the crochet hook) = hook. Ordinal row names (“1st row”, “2d row”) are written Row 1, Row 2, and “1st round”/“2d round” as Rnd 1, Rnd 2. Section headings (Heading, Edge, Foundation) are the book's own where it prints them.
- Modernisation note: The cross treble is not one of the book's keyed stitches; it is written out step by step exactly as the book prints it, and the book's own name is kept.
- Modernisation note: The book prints each design as one or two solid paragraphs; these have been split into one row, round or step per line. Stitch order and counts are unchanged. Where the book's own repeat markers (*, **, ***) span several rows they are kept as printed.
- Modernisation note: Check: the braid is a bought sectioned lace braid and the book gives no width, brand or quantity for it; the amount has to be measured from the length of edging wanted.
- Modernisation note: Thread sizes are the 1913 Cordonnet numbering. “No. N Cordonnet crochet cotton” is given as modern size N crochet thread, which is an approximation: modern size numbering runs the same way (higher number = finer thread) but the exact diameters are not identical. No yardage is printed anywhere in the book, so none is given here.
- Modernisation note: Hook sizes are the book's own steel numbering (“For No. 100 cotton use a No. 13 hook, for No. 70 cotton a No. 12 hook; for coarser cottons use a hook that will carry the thread easily without splitting it”). The 1913 steel numbering is not identical to the modern one, so every metric size below is approximate and should be adjusted to the thread.
- Modernisation note: No gauge and no finished measurements are printed for this design; work a sample repeat and adjust the hook until the lace lies flat at the width you want.
- Modernisation note: Metric conversions added.
Row progress: 0 of 3 done (0%)
Twisting the braid
0 of 3 done- Twist a third section of braid around underneath to form a ring, 1 sc over the crossed braid to fasten; make 2 more underneath twists of sections, fastened in the same manner with 1 sc over the crossed ends of braid in each.Mark row complete
- Bring the ends of the braid together at the top of the 3 rings, bring the working thread up at the back of them and make 1 sl st across, then 5 sc over the 2 cords; break the thread and fasten.Mark row complete
- Pass 2 sections; rep from the beginning for the length required.Mark row complete
Working on:
Twist a third section of braid around underneath to form a ring, 1 sc over the crossed braid to fasten; make 2 more underneath twists of sections, fastened in the same manner with 1 sc over the crossed ends of braid in each.
Continue this pattern
The rest of the Figure 47 Twisted Braid Ring Edging (1913) pattern is in the Vintage Crochet Edgings & Trims
Still to come in the full pattern:
- Row 2
- Row 3
- Heading
- Finishing
Included with 618 patterns for $9 — $0.01 per pattern.

Errata
No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.
Your notes on this pattern
Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.
Frequently asked questions
Where is the Figure 47. Edging pattern from?
It was published as "Figure 47. Edging" in The Priscilla Crochet Book: Edgings and Insertions by The Priscilla Publishing Company, Boston in 1913. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.
What yarn or thread do I need for the Figure 47. Edging?
Size 100 crochet thread. Not printed — the book gives no thread quantity for any design.
What hook should I use?
Start with 0.75 mm (US steel 14) — approximate for the book's No. 13 hook; change size until the thread runs easily without splitting and the lace lies flat. Gauge: No gauge printed. Work a sample repeat and match the hook to the thread.







