Free preview · full pattern in the Vintage Crochet Edgings & Trims

Picot Fan Edging No. 116 (1920): vintage crochet pattern

A two-row edging worked lengthwise: a narrow heading of paired double crochet with a picot bar, and a fan of four treble each capped with a picot hanging from the free end. Originally published as "No. 116" in J. & P. Coats Crochet Book No. 5: Edgings, Insertions, Medallions (designed by Anne Orr) by J. & P. Coats.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Beading and Edgings, Plates 114 to 120, with directions printed beside the photographs
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
Yardagethe book gives only the thread numbers. (as printed; yardage not given)
Hook0.75 mm
GaugeNo gauge printed.
Finished sizeNot printed. Worked to the length desired.
Timeabout 2 hours

Materials

  • Size 80 or 100 mercerized cotton crochet thread for fine goods, or size 40 or 50 for heavy linen — approximate; the book prints “use No. 80 or 100” and “make them of No. 40 or 50” with no amount
  • Steel crochet hook
  • Tapestry needle for the ends
  • Hook: Check: no hook is printed for this edging. The book's page-5 table pairs No. 100 thread with a No. 14 hook and No. 40 with a No. 11; on the modern scale, start with roughly 0.75 mm (US steel 14) for the fine threads or 1.3 mm (US steel 8) for the heavier ones, and change size until the edging lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
double crochet
treble crochet
chain space
stitch
stitches
repeat
row
skip

Notes before you start

  • Source: "No. 116" (Plate 116), J. & P. Coats Crochet Book No. 5: Edgings, Insertions, Medallions (designed by Anne Orr), J. & P. Coats (R. I.) Incorporated, Pawtucket, R.I., 1920. Public domain in the USA.
  • As printed — materials: Coats Mercerized Crochet, No. 80 or 100 for fine goods, No. 40 or 50 for heavy linen. Gauge: Not given.
  • Modernisation note: Stitches are converted by this book's own key (“Foundation Stitches and How to Make Them”, book pages 4 and 5), not by name. The key defines: chain stitch (ch); slip stitch (sl st), drawn through the stitch and the loop on the needle in one motion; single stitch (s st), insert, draw through the stitch making two loops on the needle, then draw through those two — the modern US single crochet; treble crochet (tr), thread round the needle once, draw through, off two and off two, with the note “Three chains equal one treble in measure and in count” — the modern US double crochet; double treble crochet (d tr), thread round twice, worked off two at a time for three repeats — the modern US treble; triple treble crochet (tr tr), thread round three times, four repeats — the modern US double treble. So this 1920 book's treble names stand one step taller than modern US names, and every book tr is written dc here, every d tr is written tr, and every tr tr is written dtr. This is the same key, word for word, that J. & P. Coats Crochet Books No. 2 and No. 3 print, and it is verified here from this book's own pages rather than assumed. It is American period naming, not British: the key's own working definitions settle it, since its “single stitch” draws through both loops in one step (a sc, not a British dc) and its “treble” takes only one thread-over.
  • Modernisation note: This book writes single crochet two ways in its own directions — “s st”, the key's name, and “sc”, which it uses freely in the medallion rows. Both are the modern US single crochet and both are written sc here.
  • Modernisation note: The book's wording is written in modern US form: “needle” = hook; “throw thread around the needle” = yo; “skip” = sk; “Repeat from *” = rep from *; st(s) = st(s); sp = sp; sh = shell. “2d sp”, “3d sp”, “5th s st” mean the 2nd, 3rd and 5th space or stitch counted on from the last one worked.
  • Modernisation note: Picot is the book's own (key No. 9): “usually made by a chain of three or five, then a slip stitch in the first chain”, with any variation given in the design's own directions. Where a design prints its own picot count it is kept; where it prints only “p”, the chain-3 or chain-5 picot of the key is the one to use.
  • Modernisation note: The printed paragraphs are split into one row, round or step per line; stitch order and counts are unchanged. Section headings added for navigation. Ordinal row names (“1st Row”, “2d Row”, “3d Row”) are written Row 1, Row 2, Row 3, and the book's word “Row” is kept even where the work goes around.
  • Modernisation note: Coats Mercerized Crochet numbers are read as roughly equal to the modern crochet thread sizes of the same number — approximate only. The book prints no ball length or yardage for any design, so no yardage is given here.
  • Modernisation note: Unlike Coats Books No. 2 and No. 3, this book prints a thread-and-hook table (book page 5, “Directions for Filet Crochet Work”), which pairs No. 30 thread with a No. 9 hook at 4 meshes to the inch, No. 50 with No. 12 at 6½, No. 60 with No. 12 at 7, No. 70 with No. 13 at 8, and No. 100 with No. 14 at 9½ to 10 — with the warning that the table only holds if the thread is held tight. Those are 1920 maker's steel-hook numbers and do not map onto the modern US steel scale, so any metric hook suggested here is ours, read across from the thread size; the printed numbers are recorded in the original materials.
  • Modernisation note: No gauge is printed for this design. The book's page-5 table gives meshes to the inch for filet mesh only, which is not this design's fabric; work a sample and change hook size until the edging lies flat.
  • Modernisation note: No finished measurement is printed for this design; it is worked to fit the piece it trims, so its length is set by that piece.
  • Modernisation note: Check: no colour is printed for this design. The plates photograph as a plain light thread, and the book's covers list Coats Mercerized Crochet in White and in Ecru.
  • Modernisation note: The picot at the start of Row 2 is printed in full — chain 8, caught in the 5th stitch — so the key's picot definition does not apply to that one. The three picots between the treble print only “1 p”, so the key's chain-3 or chain-5 picot is the one to use for those.
  • Modernisation note: The picot of Row 1 is likewise printed in full — chain 3, slip stitch in the 3rd stitch of the chain.
  • Modernisation note: The book gives the thread numbers for Nos. 115 and 116 together, at the foot of this design's directions.
Smart Pattern Companion

Row progress: 0 of 4 done (0%)

Edging

0 of 4 done
  1. Ch 10.
    Mark row complete
  2. Row 1: 2 dc, ch 3, 1 sl st in the 3rd st of the ch, ch 3, 1 tr in the end st, ch 2, 1 tr in the same st.
    Mark row complete
  3. Row 2: Ch 8, catch in the 5th st to form a picot, ch 1, 1 tr in the ch 2, picot, 1 tr in the same ch, picot, 1 tr in the same ch, picot, 1 tr in the same ch, ch 5, 2 dc over the 2 dc.
    Mark row complete
  4. Rep Rows 1 and 2 for the length desired.
    Mark row complete

Working on:

Ch 10.

Continue this pattern

The rest of the Picot Fan Edging No. 116 (1920) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the No. 116 pattern from?

It was published as "No. 116" in J. & P. Coats Crochet Book No. 5: Edgings, Insertions, Medallions (designed by Anne Orr) by J. & P. Coats (R. I.) Incorporated, Pawtucket, R.I. in 1920. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the No. 116?

Size 80 or 100 for fine goods, size 40 or 50 for heavy linen (approximate). Not printed — the book gives only the thread numbers.

What hook should I use?

Check: no hook is printed for this edging. The book's page-5 table pairs No. 100 thread with a No. 14 hook and No. 40 with a No. 11; on the modern scale, start with roughly 0.75 mm (US steel 14) for the fine threads or 1.3 mm (US steel 8) for the heavier ones, and change size until the edging lies flat. Gauge: No gauge printed.

You might also like