Free preview · full pattern in the Vintage Crochet Edgings & Trims

Clover Leaf Edge, No. 40 (1891): vintage crochet pattern

A four-row edging with a shell at each edge and, between them, a fan of four doubles divided by chain-three loops; the loops are covered with a single crochet, three doubles and a single crochet each, which rounds them into little leaves.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Clover Leaf Edge, No. 40, book page 45
Écru · WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
YardageNot printed. (as printed; yardage not given)
Hook5 mm
GaugeNo gauge printed.
Finished sizeNot printed.
Timeabout 2 hours

Materials

  • Crochet cotton or linen thread — the book prints no size; its own section title names cotton and linen
  • Steel crochet hook to suit the thread
  • Tapestry needle for the ends
  • Hook: Check: the book prints no hook number for any design in this section, so no modern hook can be read across from a printed size. Match the hook to whatever thread you choose, and change size until the lace lies flat.
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
single crochet
double crochet
stitch
stitches
shell
repeat
space
loop
row

Notes before you start

  • Source: "Clover Leaf Edge" (No. 40), Home Work: a choice collection of useful designs for the crochet and knitting needle, Rose Publishing Co. (Ltd.), Toronto, 1891. Public domain in the USA.
  • As printed — materials: Not printed — the book names no thread, thread number, hook number or brand for the designs in this section; its printed section title is “Designs for Crocheting in Cotton and Linen”.. Gauge: Not given.
  • Modernisation note: Stitches are converted by this book's own printed key, not by the look of the abbreviation. The key is headed “Terms used in Crochet” and stands at the head of PART ONE, SECTION I.—Terms and Stitches, BOOK PAGE 9 (image p-010.jpg), running onto book page 10 (image p-011.jpg). It prints ten entries: “Ch—Chain, a straight series of loops, each drawn with the hook through the preceding one.” “St—Stitch or Stitches.” “Sl st—Slip Stitch; put the hook through the work, thread over the hook, draw it through the stitch on the hook.” “S c—Single Crochet; having a stitch on the hook, put the hook through the work, thread over the hook, draw it through the work, thread over, draw it through the two stitches on the hook.” “D c—Double Crochet; having a stitch on the hook, put thread over the hook, then hook through the work, thread over, draw it through two stitches, thread over, draw it through the two remaining.” “Tr—Treble Crochet; like double, except that the thread is thrown twice round the hook before inserting the hook through the work. The stitches are worked off two at a time as in double crochet.” “H tr—Half Treble, sometimes called Short Treble crochet; like double crochet, except that when the three stitches are on the needle, instead of drawing thread through two stitches twice, it is drawn through all three at once.” “L tr—Long Treble; throw thread over needle three times before inserting hook in the work, work off two stitches at a time as in double crochet.” “P—Picot; make three, four, five, or as many chain stitches as you wish to have in the picot, and form them into a loop by making a single crochet or slip stitch on the first of them.” “Sh—Shell; this is usually made by putting two doubles, two chains, and two doubles in one stitch; or by putting three or more doubles in one stitch without chain stitches between.” “*—Star; this is used where certain stitches are to be repeated.” The heights are therefore MODERN US: the S c works off two loops (US single, not the British double); the D c works off three loops two at a time (US double); the Tr throws the thread twice (US treble); the L tr throws it three times (US double treble, written dtr here). The H tr is the decisive entry — it is defined as HALF OF THE DOUBLE, not of the treble, so despite its British-sounding name it is the modern US half double crochet, and its wording confirms that this book's D c really is the modern double. This book is therefore a hybrid: US heights under two British-flavoured names.
  • Modernisation note: The book's wording is written in modern US form: “make a chain of N stitches” = ch N; “miss” and “pass over” = sk; “catch” and “fasten” = sl st or join, according to what the row is doing; “throw the thread over” = yo; “needle” and “hook” both mean the hook and are written hook; “under” a chain = into the chain space; “the 4th st. of ch.” = the 4th chain; “repeat from *” = rep from *. The book's numbered paragraphs (“1.”, “2.”, “3.”) are its rows and are written Row 1, Row 2, Row 3. The book's spelling “scallop” is kept.
  • Modernisation note: The printed directions are already numbered row by row in this section, and are transcribed one row per line in the book's own order. The book's own sub-headings (Heading, For the edge, On the upper edge and so on) are kept as section headings. Stitch order and counts are unchanged and nothing is added; where the book stops without a stitch count, so does this transcription.
  • Modernisation note: This is a microform scan and the optical reading of it carries the usual slips; every figure below was read back against the page image at 220 dpi. Recurring slips in this book's scanned text are “d. o” and “d. ¢” for d. c., “s. o” and “a. c.” for s. c., “at.” and “ata.” for st. and sts., “Ist” for 1st, “lst” for 1st, “1” and “l” for the figure 1, and “Bhell” for Shell. The rows below follow what the printed page actually shows, and any place where the scan and the page disagree is listed as a Check note.
  • Modernisation note: No materials are printed for this design. This section of the book prints no thread brand, no thread number and no hook number for any of its designs — the only material guidance is the section's own printed title, “Designs for Crocheting in Cotton and Linen” (book page 23), which is recorded here as the book's own range rather than as this design's specification. Nothing is invented to fill the gap.
  • Modernisation note: No gauge is printed for this design; the book prints no gauge, tension or mesh count anywhere in this section. Work a sample and change hook size until the lace lies flat.
  • Modernisation note: No finished measurement is printed for this design. It is worked to the length of the piece it trims, so its length is set by that piece. The book's own word for its width is the one in the design's printed name — the designs called “Narrow” are narrow edgings.
  • Modernisation note: Check: no colour is printed for this design. The engravings photograph as a plain light thread. The section's printed title names cotton and linen as its materials but names no colour; white and écru are recorded here as the ordinary choices for such thread, not as this design's printed colour.
  • Modernisation note: No yardage is printed for this design, and none is estimated here — the book gives no thread size to estimate from.
  • Modernisation note: “Shell” is the book's own key term (Sh, book page 10): “two doubles, two chains, and two doubles in one stitch; or three or more doubles in one stitch without chain stitches between.” Each design in this section also states its own shell in its first row — this design's is transcribed exactly as that first row prints it — and “shell on shell” or “shell in shell” means work the whole group into the shell of the row below. Nothing is standardised across designs here; the book's local wording is kept.
  • Modernisation note: This is the SECOND design called “Clover Leaf Edge” in this book. The first, at book page 29, is already in this file; it starts on a chain of 10 and builds shell-on-shell with chain-6 loops covered in single crochet. This one starts on a chain of 16 and covers chain-3 loops. They are different designs sharing a name, so this one carries its printed number in its title and slug.
  • Modernisation note: Check: in Row 1 the figure between “3 d. c. in 13th st.,” and “3 d. c. in same” failed to print on this copy — the page shows only the word “ch.” and a broken mark where the number should be. It is written “ch 2” here because the design's own shell, defined in the same row, is “3 d. c. in 5th st., ch. 2, 3 d. c. in same”; nothing else is supplied.
  • Modernisation note: Check: the scan reads Row 1 as “ch, 3, } ¢ CG in same”; the page image reads “ch. 3, 1 d. c. in same”.
  • Modernisation note: Check: the scan loses the number of Row 2 (“= "Shell in shell”) and reads its first chain as “ch. 8”; the page image prints “2. Shell in shell, ch. 3”.
  • Modernisation note: Check: the scan reads Row 4 as “One g.¢c., 5d, 1 a o, in chain of 3”; the page image reads “One s. c., 5 d. c. 1 s. c. in chain of 3” — the comma after the 5 doubles is not printed.
  • Modernisation note: The engraving printed with this design is a solid black block in this microform; nothing can be read from it.
Smart Pattern Companion

Row progress: 0 of 5 done (0%)

The edging

0 of 5 done
  1. Ch 16; turn.
    Mark row complete
  2. Row 1: Three dc in the 5th st, ch 2, 3 dc in the same; this forms a shell; ch 3, 1 dc in the 9th st; ch 3, 1 dc in the same, ch 3, 1 dc in the same, ch 3, 1 dc in the same, ch 3, 3 dc in the 13th st, ch 2, 3 dc in the same, ch 5; turn.
    Mark row complete
  3. Row 2: Shell in shell, ch 3, 1 sc in the loop made by 3 ch, 3 dc in the same, 1 sc in the same, the next two loops the same, ch 3, shell in shell, ch 2, catch in the 5 ch; turn.
    Mark row complete
  4. Row 3: Chain 5, shell in shell, ch 3, 1 dc in the 3rd st of the middle shell, ch 3, 1 dc in the same, ch 3, 1 dc in the same, ch 3, 1 dc in the same, ch 3, shell in shell, ch 1, 1 dc in the 5 ch, ch 3, 1 dc in the 5 ch, ch 3, 1 dc in the 5 ch, ch 3, 1 dc in the 5 ch, ch 1, catch in the shell; turn.
    Mark row complete
  5. Row 4: One sc, 5 dc, 1 sc in the chain of 3, the same in the next 2, ch 1, shell in shell, and finish as the 2nd row.
    Mark row complete

Working on:

Ch 16; turn.

Continue this pattern

The rest of the Clover Leaf Edge, No. 40 (1891) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Clover Leaf Edge pattern from?

It was published as "Clover Leaf Edge" in Home Work: a choice collection of useful designs for the crochet and knitting needle by Rose Publishing Co. (Ltd.), Toronto in 1891. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Clover Leaf Edge?

See the materials list. Not printed.

What hook should I use?

Check: the book prints no hook number for any design in this section, so no modern hook can be read across from a printed size. Match the hook to whatever thread you choose, and change size until the lace lies flat. Gauge: No gauge printed.

You might also like