Free preview · full pattern in the Vintage Crochet Hats, Bags & Accessories

Large Diamond Pattern Belt with Square Slide (1912): vintage crochet pattern

A single crochet belt 20 stitches wide worked in the book's satin stitch — a single crochet taken over the whole stitch of the row below, then repeated over itself on the next row — the pairs of satin stitches travelling outward row by row to draw a large diamond. A square slide with a chain-and-single-crochet mesh completes it.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

Popular Crocheted Belts — the large-diamond belt with its square slide is the bottom belt in the plate
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
YardageNot printed. The book gives balls, skeins, cards or pieces only, and their weight and yardage are not stated. (as printed; yardage not given)
Hook2.1 mm
GaugeNo gauge printed.
Finished sizeNot printed — the belt is worked "for the length required".
Timeabout 6 hours

Materials

  • Size 3 six-cord mercerized cotton crochet thread — approximate; the original was 3 balls of Cordonnet Special No. 3
  • Steel crochet hook (original: Star crochet hook No. 3)
  • Cardboard or a papier-mâché square form for the slide, and four threads for the padding cord
  • Hook: Start with 2.1 mm (US steel 3) — approximate; the book says to chain loosely and otherwise work firmly
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
single crochet
stitch
stitches
row
round
repeat
skip
space
back loop only

Notes before you start

  • Source: "Large Diamond Pattern Belt", The Glossilla Book of Crochet Novelties, Bernhard Ulmann & Co., New York City, 1912. Public domain in the USA.
  • As printed — materials: For each belt 3 balls Cordonnet Special No. 3; 1 Star Crochet Hook, No. 3. Gauge: Not given.
  • Modernisation note: Stitches are converted by this book's own key ("DESCRIPTION OF STITCHES — TERMS USED", book pages 3-6; the designs themselves cite it as "see page 3", "see page 4", "see page 5"), not by name. The printed table is: "ch. … chain stitch; s. c. … single crochet; d. c. … double crochet; t. c. … treble crochet; * a sign of a repetition to begin at that point." The worked definitions show that this 1912 book already uses modern US heights: its single crochet ("frequently known as half stitch") is worked by inserting the hook in the second chain from the hook, drawing the thread through, then thread over and through the 2 loops on the hook — the modern US single crochet; its double crochet ("known by many as 'plains'") is thread over, hook into the fourth chain from the hook, draw a loop through (3 loops on the hook), then thread over and through 2 loops twice — the modern US double crochet; its treble crochet is the same "only winding the thread on the needle twice instead of once", worked off two at a time three times — the modern US treble; and its "long treble crochet" wraps the thread three or four times — the modern US double treble or triple treble. So throughout this transcription the book's s. c. = sc, d. c. = dc, t. c./tr. c. = tr, and long treble = dtr. No stitch changes height.
  • Modernisation note: The asterisk is the book's own: "a sign of a repetition to begin at that point" (stitch key, book page 3). Repeat counts are kept exactly as printed — "repeat from * 4 times" is transcribed as printed and not re-counted.
  • Modernisation note: Period wording modernised: "needle" (used for the crochet hook) written as hook; "thread over (the needle)" as yo; "pick up a loop"/"draw up a loop" kept; "catch" (with a slip stitch) as join or sl st as the sense requires; "skip" as sk; "taking up the back thread only" as "in the back loop only"; "taking up both threads" as "under both loops"; "widen"/"narrow" as increase/decrease; "fasten off" kept; spaced abbreviations s. c., d. c., t. c./tr. c., sl. st., ch. written sc, dc, tr, sl st, ch. Ordinal row and round names ("Second row", "Eleventh round") written Row 2, Rnd 11.
  • Modernisation note: Long printed paragraphs are split into one row, round or step per line; stitch order and counts are unchanged. Section headings added for navigation where the printed text runs on.
  • Modernisation note: The materials are Bernhard Ulmann trade names of 1912 and have no exact modern equivalent; every modern substitution given here is an approximation. The book's own materials page describes them: "Glossilla Crochet" — "used where the highest lustre is required, even superior to silk"; "Solitaire Yarn" — "the most lustrous ball cotton yarn … in a large assortment of colors"; "Klondyke Thread" — "a soft metal thread for crocheting … in a rich, bright, gold color; furthermore, in aluminum, antique gold and antique silver"; "Handicraft Macrame" and "Bear Macrame" cords; "D. M. C. Cordonnet, in numbers 3 to 30" and "D. M. C. Perle, numbers 3 and 5". Bear Brand wools (Shetland floss, Zephyr Shetland, Saxony 3-fold, 4-fold Germantown) are the publisher's knitting yarns; their weights are not printed, and the CYC weights suggested here are read from how they are used, not from the book.
  • Modernisation note: Hooks are printed only as "Star crochet hook No. …" (the steel hooks) or "bone"/"amber" hook numbers, with no diameters anywhere in the book, so no exact metric size can be read from it. The millimetre and US sizes suggested here are approximate starting points; the bone- and amber-hook numbers were never standardised, so those suggestions are ours. Work a swatch and change size until the work lies flat and matches the photograph.
  • Modernisation note: No gauge is printed for this design, and none is printed anywhere in the book.
  • Modernisation note: "Satin stitch" and "double satin stitch" are the book's own names, defined at the head of these directions; both are kept.
  • Modernisation note: Check: Row 4 is broken in this copy's scan ("2s. 8. 2. ¢. 2 Bo PS B"); it is read from the printed page as 7 sc, 2 satin st, 2 sc, 2 satin st, 7 sc, which is also what the rows above and below require.
  • Modernisation note: Check: Row 10 is likewise damaged in the scan and reads on the page as 1 sc, 2 satin st, 6 sc, 2 satin st, 6 sc, 2 satin st, 1 sc.
  • Modernisation note: Check: this belt takes its materials and slide foundation from the Diagonal Stripe Belt printed above it in the book.
  • Modernisation note: Check: no colour is printed for this design beyond the thread named in the materials.
  • Modernisation note: No finished measurement is printed for this design.
Smart Pattern Companion

Row progress: 0 of 15 done (0%)

Belt

0 of 15 done
  1. Ch 21, not too tightly; otherwise the work must be firmly done.
    Mark row complete
  2. Row 1: Insert the hook in the second ch from the hook and draw the thread through, thread over and through the two loops on the hook, forming 1 sc. Continue in this way in each ch until there are 20 sc in all.
    Mark row complete
  3. Stitch note: "Satin stitch" means to make a single crochet over the whole sc of the preceding row (1 s. s.). "Double satin stitch" means to repeat the satin stitch over the whole satin stitch of the preceding row (1 d. s. s.).
    Mark row complete
  4. Row 2: Turn, 9 sc picking up both loops of the stitch of the preceding row, 2 satin st, 9 sc.
    Mark row complete
  5. Row 3: Turn, 9 sc, 2 double satin st, 9 sc.
    Mark row complete
  6. Row 4: Turn, 7 sc, 2 satin st, 2 sc, 2 satin st, 7 sc.
    Mark row complete
  7. Row 5: Turn, rep Row 4, using double satin stitch instead of single.
    Mark row complete
  8. Row 6: Turn, 5 sc, 2 satin st, 6 sc, 2 satin st, 5 sc.
    Mark row complete
  9. Row 7: Rep Row 6, using double satin stitch as before.
    Mark row complete
  10. Row 8: Turn, 3 sc, 2 satin st, 10 sc, 2 satin st, 3 sc.
    Mark row complete
  11. Row 9: Rep Row 8, using double satin stitch.
    Mark row complete
  12. Row 10: Turn, 1 sc, 2 satin st, 6 sc, 2 satin st, 6 sc, 2 satin st, 1 sc.
    Mark row complete
  13. Row 11: Rep Row 10, using double satin stitch. This forms one-half of the diamond.
    Mark row complete
  14. Continue working in the opposite direction until the pattern is complete — rep Row 8, and so on.
    Mark row complete
  15. Make 2 rows of 20 sc each, then rep from Row 2 for the length required.
    Mark row complete

Working on:

Ch 21, not too tightly; otherwise the work must be firmly done.

Continue this pattern

The rest of the Large Diamond Pattern Belt with Square Slide (1912) pattern is in the Vintage Crochet Hats, Bags & Accessories

Still to come in the full pattern:

  • Square slide
  • Finishing

Included with 202 patterns for $12 — $0.06 per pattern.

See what's inside
Cover artwork for the vintage hats and accessories collection: a crochet hat, purse and slippers

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Large Diamond Pattern Belt pattern from?

It was published as "Large Diamond Pattern Belt" in The Glossilla Book of Crochet Novelties by Bernhard Ulmann & Co., New York City in 1912. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Large Diamond Pattern Belt?

Size 3 crochet cotton. Not printed. The book gives balls, skeins, cards or pieces only, and their weight and yardage are not stated.

What hook should I use?

Start with 2.1 mm (US steel 3) — approximate; the book says to chain loosely and otherwise work firmly Gauge: No gauge printed.

You might also like