Free preview · full pattern in the Vintage Crochet Edgings & Trims
Irish Crochet Edge (1923): vintage crochet pattern
An edge built on a foundation of spaces sewn to the linen: single crochet fills the spaces, a chain loop is thrown back and covered, and a fan of double crochet with chain between is worked over it and finished with a picot round.
By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

| Detail | Value |
|---|---|
| Skill level | Intermediate |
| Yarn weight | Lace (#0) |
| Yardage | the book gives only the thread number. (as printed; yardage not given) |
| Hook | 0.75 mm |
| Gauge | No gauge printed. |
| Finished size | Not printed. |
| Time | about 2 hours |
Materials
- Size 100 mercerized cotton crochet thread — approximate; the original was Clark's O. N. T. Mercerized Crochet, No. 100
- Steel crochet hook
- Tapestry needle for the ends
- Hook: Start with a 0.75 mm (US steel 14) hook — approximate. Change size until the edging lies flat.
Yarn Kit & Substitution Options
This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:
Caron Simply Soft · 100% Acrylic
315 yds per skein · High-yield yardage, silky no-scratch texture
2 skeins required
approx. $$10.98 total
Abbreviations (US terms)
- chain
- slip stitch
- single crochet
- double crochet
- space
- chain space
- stitch
- stitches
- repeat
- round
- skip
- puff stitch
- loop
Notes before you start
- Source: "Irish Crochet Edge", Clark's O. N. T. Designs for 100 Edges and Insertions, Book No. 19, The Clark Thread Co., Newark, N. J., 1923. Public domain in the USA.
- As printed — materials: Clark's O. N. T. Mercerized Crochet, No. 100; Clark's O. N. T. Crochet Hook No. 14. Gauge: Not given.
- Modernisation note: Stitches are converted by this book's own key (“INSTRUCTION PAGE”, book page 30), not by the look of the abbreviation. The key defines: St. stitch; Ch chain; Sk “Skip, pass by”; S c single crochet — “Draw a loop through stitch or chain directed (2 loops on needle), draw thread through both”, the modern US single crochet; D c double crochet — “Used most frequently in daisy petals or similar shapes. Thread over needle, draw loop through stitch directed (3 loops on needle), draw thread through all 3 at once”, which is the modern US HALF double crochet, not the modern double; Tr treble — “Thread over needle, draw loop through stitch directed (3 on needle), draw off two loops at a time, twice”, which is the modern US DOUBLE crochet; H tr half treble — “Make as above, leaving the last two loops on the needle, to be taken off later… the two loops are regarded as one”, the book's cluster-forming stitch; D tr double treble — “Thread over twice, thread through stitch (4 on needle), draw off two at a time, three times”, the modern US treble; Tr tr triple treble — “Thread over three times, draw off two at a time, four times”, the modern US double treble; Lg tr long treble — “Made like tr tr, with the thread over a given number of times”. So this 1923 book's treble names stand one step taller than modern US names. Every book tr is written dc here, every d tr is written tr, every tr tr is written dtr, and the book's d c is written hdc. This is a genuine finding rather than an assumption: 1920s books often do use modern US terms, but this one does not, and the key's own working definitions are what settle it.
- Modernisation note: The book's wording is written in modern US form: “needle” and “hook” both mean the hook and are written hook; “thread over” = yo; “skip” = sk; “catch” = sl st or join, according to what the row is doing; “Repeat from *” = rep from *; st(s) = st(s); sp = sp. The book's OCR prints the ordinal “1st” as “Ist” throughout and that quirk is kept in the excerpts but not in the rows.
- Modernisation note: The printed paragraphs are split into one row, round or step per line; stitch order and counts are unchanged. Section headings added for navigation. Ordinal row names (“1st row”, “2nd row”, “3rd row”) are written Row 1, Row 2, Row 3, and the book's word “row” is kept even where the work goes around.
- Modernisation note: Clark's O. N. T. Mercerized Crochet numbers are read as roughly equal to the modern crochet thread sizes of the same number — approximate only.
- Modernisation note: The Clark's O. N. T. crochet hook numbers printed here are 1923 maker's steel-hook numbers and do not map onto the modern US steel scale, so any metric hook suggested here is ours, read across from the thread size; the printed hook number is recorded in the original materials.
- Modernisation note: No gauge is printed for this design — the book prints no gauge, tension or mesh count anywhere. Work a sample and change hook size until the edging lies flat.
- Modernisation note: No finished measurement is printed for this design; it is worked to the length of the piece it trims, so its length is set by that piece.
- Modernisation note: Check: no colour is printed for this design. The plates photograph as a plain light thread, and the book's own ad pages list Clark's O. N. T. Mercerized Crochet in White and in colours.
- Modernisation note: Space and block are the book's filet units, defined on the same page-30 key: Sp space — “With 1 tr made, ch 2, sk 2, tr in next st”; Bl block — “4 tr in 4 adjoining stitches. For two or more adjoining bl, count 3 tr for each bl and add one for the last bl, as there is always one tr in common between each two adjoining bl.” Widen and narrow (Wd, N) are the key's shaping words, and H bl half block is “another name for the narrowed block… made with h tr”. In modern terms a space is 1 dc, ch 2, sk 2, and a block is 4 dc, counting 3 dc per block after the first.
- Modernisation note: No yardage is printed for this design. The book's back-cover table (book page 30 of the printed numbering) gives ball yields for ten designs only, and this is not one of them, so no yardage is given here.
- Modernisation note: Check: the picot is the book's own — “ch 5 and catch, for a picot” — so a chain-5 picot closed back into the stitch it springs from.
- Modernisation note: Check: the book calls both of the last two paragraphs part of round 2 and then says “Repeat from beginning around”, so the loop-and-fan unit and the picot row together make one repeat, worked over six spaces of the foundation at a time.
Row progress: 0 of 5 done (0%)
Edge
0 of 5 done- Make a ch the length needed for the edge, and sew it to the edge of the linen.Mark row complete
- Round 1: 1 dc in the 1st ch, *ch 2, sk 2, 1 dc in the next; rep from * to the end.Mark row complete
- Round 2: 3 sc in each of the 1st 6 sps, turn, ch 8, sl st in the 6th sc from the hook, turn, 10 sc over the ch-8, 3 sc in the next sp, turn, make 1 dc in each sc of the loop, always with ch 1 between, and at the end join to the 3rd sc from the end of the ch-8 loop.Mark row complete
- Turn, and in each sp make 1 sc, and after each sc ch 5 and sl st back for a picot.Mark row complete
- Rep from the beginning of Round 2 around.Mark row complete
Working on:
Make a ch the length needed for the edge, and sew it to the edge of the linen.
Continue this pattern
The rest of the Irish Crochet Edge (1923) pattern is in the Vintage Crochet Edgings & Trims
Still to come in the full pattern:
- Finishing
Included with 618 patterns for $9 — $0.01 per pattern.

Errata
No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.
Your notes on this pattern
Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.
Frequently asked questions
Where is the Irish Crochet Edge pattern from?
It was published as "Irish Crochet Edge" in Clark's O. N. T. Designs for 100 Edges and Insertions, Book No. 19 by The Clark Thread Co., Newark, N. J. in 1923. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.
What yarn or thread do I need for the Irish Crochet Edge?
Size 100 crochet cotton (approximate). Not printed — the book gives only the thread number.
What hook should I use?
Start with a 0.75 mm (US steel 14) hook — approximate. Change size until the edging lies flat. Gauge: No gauge printed.







