Free preview · full pattern in the Vintage Crochet Baby & Kids' Patterns

Silk Crochet Hat with Brim (1911): vintage crochet pattern

A baby's silk hat worked in rounds: a single-crochet crown increased to two and a half inches across, a shell-pattern side worked to five and a half inches from the centre, a band of single crochet and a shaped brim increased over two sets of rounds.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

No. 29, the silk Crochet Hat with its brim, on the book's plate of bonnets and hats
WhiteSave to Pinterest
Pattern at a glance
DetailValue
Skill levelIntermediate
Yarn weightLace (#0)
Yardagethe book gives 1 skein of jumper silk; skein weight and yardage are not stated. (as printed; yardage not given)
Hook1.75 mm
GaugeNo gauge printed; the crown measures 2½ in (6.5 cm) and the whole hat 5½ in (14 cm) from the centre of the crown.
Finished sizePrinted in part: the crown is increased until it measures 2½ in (6.5 cm) from its centre, the side worked until the hat measures 5½ in (14 cm) from the centre of the crown; the brim is two increase rounds with 2 and then 6 rounds without increase.
Timeabout 3 hours

Materials

  • Fine crochet silk or size 5 pearl cotton — approximate; the original was 1 skein of jumper silk
  • Crochet hook (original: No. 13 Strathnoid)
  • Ribbon for trimming
  • Tapestry needle
  • Hook: Start with 1.75 mm (US steel 5) — approximate; work to the printed measurements rather than to a hook size
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
single crochet
double crochet
stitch
stitches
repeat
skip
shell
row
round
fasten off

Notes before you start

  • Source: "Crochet Hat (Silk)" (No. 29), What to Make for Baby, Part One (Ella Allan), Mrs Ella Allan's Publications; printed by The Specialty Press Pty. Ltd., Melbourne. Public domain in the USA.
  • As printed — materials: 1 skein jumper silk; Crochet hook No. 13 (Strathnoid). Gauge: Not given.
  • Modernisation note: Stitches converted by the book's own “Explanation of Crochet Stitches” page, not by name — the key is a British one, so every stitch is renamed here: chain = ch; “single crochet” (“put hook through work at stitch indicated; draw thread through work and through loop on needle at same time. This is sometimes called Slip Stitch.”) = modern slip stitch (sl st); “double crochet” (d c: insert the hook, thread over and draw through making 2 loops, thread over and draw through both) = modern single crochet (sc); “treble” (tr: thread over, insert, draw through making 3 loops, thread over through 2, thread over through the remaining 2) = modern double crochet (dc); “double treble” (thread over twice) = modern treble (tr); “long treble” (thread over three times) = modern double treble (dtr). The heights are confirmed by the book's own turning chains — it turns a d c row with 2 ch and a treble row with 3 ch — so nothing here rests on the names alone.
  • Modernisation note: The book's abbreviations are written in modern US form: ch = ch, d c = sc, tr = dc, st(s) = st(s); “miss” = sk; “wool over” / “thread over” = yo; “needle” (used for the crochet hook as well as the knitting needle) = hook; “hole” (the space under a chain) = ch-sp or sp; “break off” / “fasten off” = FO; “repeat” = rep. Ordinal names (“1st Row”, “2nd Round”) are written Row 1, Rnd 1; where the book calls a circuit of a round piece a “row” its own word is kept. The book's words “shell”, “group”, “cluster”, “tuft”, “star”, “eye” and “picot” are kept as printed, each with the book's own definition given at first use.
  • Modernisation note: Long printed paragraphs are split into one row, round or step per line; stitch order and counts are unchanged. Section headings added for navigation.
  • Modernisation note: Hooks are printed only as Strathnoid numbers (No. 10, 12, 13, 14) — a proprietary sizing with no diameters printed — or as “fine hook”, “fine steel crochet hook” or “large hook”. No exact metric size can be read from the book, so the suggested modern hook is an approximate starting point chosen for the yarn and tied to any printed measurement.
  • Modernisation note: No stitch gauge is printed anywhere in the book. Work a swatch and match any printed measurement (repeated in the modern gauge line) before starting.
  • Modernisation note: The yarns are 1911 Australian trade names with no exact modern equivalent, and the book prints no yardage and no ball or skein weights. The CYC weights given are approximations only, to be matched by gauge or measurement rather than by weight: 2-ply fingering as super fine (CYC #1); 3-ply and 4-ply fingering, 4-ply “Lady Betty” and Andalusian wool as fine (CYC #2); “Ivorine” wool as a fine baby wool (CYC #2, approximate — the book gives no ply for it); crochet silk and “jumper silk” as a fine thread rather than a yarn. “Ivorine” and “Lady Betty” are brand names, not colours or fibre descriptions.
  • Modernisation note: No finished measurements, ages or sizes are printed for this design; the figures given are the book's own stitch and row counts and any lengths it prints.
  • Modernisation note: Check: no year is printed in the book. The title page gives only the title, “57 designs in knitting and crochet”, “Part One”, the author and the Melbourne printer; the cover instead says “55 designs in knitting or crochet”. The year 1911 is the date recorded for this scan, which notes that it is approximate.
  • Modernisation note: The book's photographs are black and white and this design's colour is not printed, so the colour given is read from the photograph only.
  • Modernisation note: The scan renders the two measurements as “24 inches” and “54 inches”; the printed page reads 2½ inches and 5½ inches, which is what is used.
  • Modernisation note: The book's misprint “puting” for “putting” in the crown is corrected silently; nothing else in that sentence is changed.
  • Modernisation note: Metric conversions added.
  • Modernisation note: Finishing line (weaving in ends) added.
Smart Pattern Companion

Row progress: 0 of 4 done (0%)

Crown

0 of 4 done
  1. Ch 4, join and into the ring make 12 dc.
    Mark row complete
  2. Rnd 1: 2 sc in the 1st st, 1 sc in the next st, alternately all around.
    Mark row complete
  3. Rnd 2: *2 sc in the 1st st and 1 sc in each of the next 2 sts. Rep from * all around.
    Mark row complete
  4. Increase in this way, putting 2 sc in the 1st st of each increase and 1 sc in each st between, until the work measures 2½ in (6.5 cm) from the centre of the crown; then work 2 rows without increase.
    Mark row complete

Working on:

Ch 4, join and into the ring make 12 dc.

Continue this pattern

The rest of the Silk Crochet Hat with Brim (1911) pattern is in the Vintage Crochet Baby & Kids' Patterns

Still to come in the full pattern:

  • Side
  • Brim
  • Finishing

Included with 133 patterns for $12 — $0.09 per pattern.

See what's inside
Cover artwork for the vintage baby sets collection: a crochet bonnet, booties and sacque in soft yarn

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Crochet Hat (Silk) pattern from?

It was published as "Crochet Hat (Silk)" in What to Make for Baby, Part One (Ella Allan) by Mrs Ella Allan's Publications; printed by The Specialty Press Pty. Ltd., Melbourne. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Crochet Hat (Silk)?

Fine crochet silk — the book gives no size, only “jumper silk”. Not printed — the book gives 1 skein of jumper silk; skein weight and yardage are not stated.

What hook should I use?

Start with 1.75 mm (US steel 5) — approximate; work to the printed measurements rather than to a hook size Gauge: No gauge printed; the crown measures 2½ in (6.5 cm) and the whole hat 5½ in (14 cm) from the centre of the crown.

You might also like