Free preview · full pattern in the Vintage Crochet Edgings & Trims

No. C138 Round Scalloped Edge (1916): vintage crochet pattern

A filet edging of holes and solid blocks in which the rows lengthen by a chain-8 start and shorten by a slip-stitched start, so that the outer edge falls into rounded scallops, which are then filled in with single crochet.

By the crochetpatterns.io editorial team · Updated · Editorial policy · pattern testing in progress

No. C138 Round Scalloped Edge — directions
White · EcruSave to Pinterest
Pattern at a glance
DetailValue
Skill levelEasy
Yarn weightLace (#0)
YardageNot printed. The book prints a yardage for only one design in the whole volume, and not for this one. (as printed; yardage not given)
Hook1.9 mm
GaugeNo gauge printed.
Finished sizeNot printed; the edging is worked on a chain of 29 and repeated to the length wanted.
Timeabout 3 hours

Materials

  • Size 30 mercerized cotton crochet thread — approximate; no thread is printed for this design
  • Steel crochet hook — the book prints no hook for this design
  • Tapestry needle
  • Hook: Start with 1.9 mm (US steel 5) — approximate and not printed; change size until the edging lies flat
Smart Yarn Matcher

Yarn Kit & Substitution Options

Compare all yarns →

This pattern calls for 350 yards of weight #0 yarn. Select a suggested yarn to see required skeins and estimated cost:

Caron Simply Soft · 100% Acrylic

315 yds per skein · High-yield yardage, silky no-scratch texture

2 skeins required

approx. $$10.98 total

Abbreviations (US terms)

chain
slip stitch
single crochet
double crochet
stitch
stitches
row
repeat
skip
space
increase
decrease

Notes before you start

  • Source: "Round Scalloped Edge No. C138" (C138), The Artamo Crochet Book No. 1, Bentley-Franklin Company, New York, 1916. Public domain in the USA.
  • As printed — materials: Not given. Gauge: Not given.
  • Modernisation note: Stitches are converted by this book's own key (“The Rudimentary Stitches of Crochet”, book pages 2-3), not by name. The key defines: chain (ch); “single crochet (s. c.)”, sometimes called tight stitch or half stitch — draw up a loop and draw another loop through both loops on the needle, which is the modern US single crochet; “double crochet (d. c.)”, frequently called a plain — thread over, draw up a loop (3 loops on the needle), draw through 2, then draw through the 2 remaining, which is the modern US double crochet; “short double crochet” — thread over, draw up a loop, draw the thread through all 3 loops at once, which is the modern US half double crochet; “treble crochet (t or tr)” — thread over twice, draw up a loop (4 loops), then cast off 2 at a time three times, which is the modern US treble; “long treble crochet”, also called double treble in the directions — thread over three times and cast off 2 at a time until all loops are worked off, which is the modern US double treble; slip stitch, “sometimes called the quarter-stitch”. So throughout this transcription the book's s.c. = sc, d.c. = dc, short d.c. = hdc, t/tr = tr and long treble/double treble = dtr. This book's heights already match modern US usage, so no shift of names was needed.
  • Modernisation note: The book's wording is written in modern US form: “needle” = hook; “thread over (the needle)” = yo; “skip” = sk; “pick up a loop” = draw up a loop; “narrow” = decrease; “widen” = increase; “picked up on the double thread” = worked under both loops; “picked up on the back thread” = worked in the back loop only; “join in a ring” = sl st to join into a ring. Ordinal row and round names (“1st row”, “2nd round”) are written Row 1, Rnd 2 and so on.
  • Modernisation note: Long printed paragraphs are split into one row, round or step per line; stitch order and counts are unchanged. Section headings added for navigation.
  • Modernisation note: “Artamo” was a brand of cotton sold by the publisher and described on the book's back cover: Cordonnet, a six-cord crochet cable cord for crochet and lace making, in sizes 3, 5, 10, 15, 20, 30, 40, 50, 60, 70, 80 and 100; Crochet Perle, in white and fast colours, in sizes 3 and 5; and Four-Ply, four fine strands loosely twisted together, for embroidery. The modern equivalents given here are approximations only: Artamo Cordonnet reads as modern six-cord mercerized cotton crochet thread of the same number, Artamo Crochet Perle as modern pearl (perle) cotton of the same number, and Artamo Four-Ply as modern six-strand cotton embroidery floss. Sizes 15 and 25 are no longer commonly made; the nearest modern sizes are noted where they occur.
  • Modernisation note: Hooks are printed only as “Steel Crochet Hook No. …” or “Bone Crochet Hook No. …” with no diameters, so no exact metric size can be read from the book. The metric sizes given are approximate starting points read across to the modern US steel-hook scale, in which a higher number is finer. Check: the old bone-hook numbers were never standardised and do not line up with any modern scale, so the millimetre size suggested for a bone hook is ours; work a swatch and change size to match the photograph.
  • Modernisation note: No gauge is printed for this design. Work a swatch and change hook size until the work lies flat and matches the photograph.
  • Modernisation note: No thread and no hook are printed for this design, so the sizes suggested in the modern materials are ours and are a starting point only.
  • Modernisation note: A “hole” is the book's filet mesh, 2 chain stitches and 1 double crochet, and the count of double crochet in a group always includes the one that closed the hole before it — the book states that rule on book page 34, with the Daisy Insertion.
  • Modernisation note: This edging has a matching insertion, No. C139, transcribed separately.
  • Modernisation note: Check: no colour is printed beyond the thread named in the materials.
  • Modernisation note: No finished measurement is printed for this design.
  • Modernisation note: Metric conversions added where a measurement is printed; the printed inches are unchanged.
Smart Pattern Companion

Row progress: 0 of 8 done (0%)

Edging

0 of 8 done
  1. Row 1: Ch 29, turn, 1 dc in the eighth chain from the hook, 1 hole with 4 dc after it, 1 hole, 4 dc, 3 holes to the end.
    Mark row complete
  2. Row 2: 4 holes, 4 dc, 3 holes to the end.
    Mark row complete
  3. Row 3: Ch 8, turn and make 1 dc in the first dc of the preceding row, thus increasing 1 hole, 1 hole, 16 dc, 2 holes to the end.
    Mark row complete
  4. Row 4: 1 hole, 4 dc, 5 holes, 4 dc, 1 hole.
    Mark row complete
  5. Row 5: 1 hole, 4 dc, 1 hole, 10 dc, 1 hole, 4 dc, 1 hole.
    Mark row complete
  6. Row 6: 2 holes, 4 dc, 3 holes, 4 dc, 2 holes.
    Mark row complete
  7. Row 7: Turn and sl st to the second dc of the preceding row, 2 holes, 4 dc, 1 hole, 4 dc, 3 holes.
    Mark row complete
  8. Rep from the beginning of Row 2 for the length wanted.
    Mark row complete

Working on:

Row 1: Ch 29, turn, 1 dc in the eighth chain from the hook, 1 hole with 4 dc after it, 1 hole, 4 dc, 3 holes to the end.

Continue this pattern

The rest of the No. C138 Round Scalloped Edge (1916) pattern is in the Vintage Crochet Edgings & Trims

Still to come in the full pattern:

  • Outer edge
  • Finishing

Included with 618 patterns for $9 — $0.01 per pattern.

See what's inside
Cover artwork for the vintage edgings and trims collection: narrow crochet lace strips on folded linen

Errata

No corrections have been published for this pattern. Found a mistake? Tell us and we will log the fix here with a date.

Project log

Your notes on this pattern

Keep track of the yarn, hook and changes you used. Saved in this browser only — nobody else can see it.

Frequently asked questions

Where is the Round Scalloped Edge No. C138 pattern from?

It was published as "Round Scalloped Edge No. C138" in The Artamo Crochet Book No. 1 by Bentley-Franklin Company, New York in 1916. The publication is in the public domain in the United States; this version is transcribed and modernised by crochetpatterns.io.

What yarn or thread do I need for the Round Scalloped Edge No. C138?

Size 30 crochet cotton (approximate; not printed). Not printed. The book prints a yardage for only one design in the whole volume, and not for this one.

What hook should I use?

Start with 1.9 mm (US steel 5) — approximate and not printed; change size until the edging lies flat Gauge: No gauge printed.

You might also like